Søkeresultater for 'goalie target'

PRO MASK Intermediate Goalie Leg Pads Les mer

CCM Premier R1.9 Intermediate Goalie Leg Pads. pads are designed to produce powerful rebounds that allow the goaltender to reset and move into position for a potential second save. The leg pads achieve this due to the extremely rigid internal foams that give excellent re-distribution of energy. While the pads have no visible breaks there is a single internal core break below the knee to allow better flexibility, and CCM has kept the pad above the knee completely rigid to ensure a strong 5 hole closure. The thin profile design helps improve center of mass when moving and dropping into the butterfly, as well as reduces weight, resulting in the light Premier pad. Strapping safety is in the Premier R1.9 goal is achieved throughout the back of the leg channel with a new Pro strapping system. With a single leather strap at the knee, and a single leather strap at the top of the calf channel, the pad is held to your leg in key spots and giving the pad an extremely close feel. CCM has incorporated a 4” wide Velcro calf lock keeping the leg snug into the pad, but allowing fast rotation. Since the growing popularity of the CCM line, the knee lock strap is now angled down into the calf providing a wide open feeling at the knee to accommodate larger knee pads and further promote fast pad rotation down into the butterfly and reverse VH. Featuring a redesigned boot angle, this pad will help promote pucks to rocket into the corners and reduce the risk of negative rebounds back towards the front of the net. Les mer

The next generation of the legendary Tacks name is here and better than ever, and with it comes a beefed up line of CCM’s most durable sticks to date. With RBZ offering a custom kick and Ribcor offering a quick release low kick, CCM caters to the snipers with a mid-kick point in the Ultra Tacks. The Ultra Tacks was designed to provide unmatched accuracy and precision in a high performance lightweight and durable stick. CCM found success with Attackframe technology, which was featured in the original Tacks stick, only to one up it with a much lighter version of the same tech now dubbed Ultra Attackframe. Engineers designed their blade to have a structure with a strong outer frame and two stiffer bridges that run heel to toe. The stiff reinforcements that run across the blade help to increase bending stiffness and torsional rigidity which prevents any twisting of the blade and keeps you square to your target while delivering consistent and accurate shots. By reducing the weight of the blade you get a better overall balanced feel which in turn promotes a higher performing stick and more accurate shots. Another benefit of having this stiffer blade is the durability factor as well as reliability. With the Ultra Attackframe technology, pro testimonials state that their Tacks stick is lasting longer while providing that same feel they had the first day they received their stick, giving them the consistency needed to perform. Featuring Bumper technology in the shaft, the Ultra Tacks stick has become one of CCM’s strongest and longest lasting sticks to take durability to the next level. The majority of hockey sticks break when you receive a slash which then damages a corner of the shaft. Now apply more force onto that damaged area while you shoot or stick check and SNAP! What happened is when force was applied, the layers of carbon fiber started to separate and weaken the stick to the point of breakage. Bumper technology is the addition of more material to the inside of the shaft corners which prevents the separation and breakdown of the carbon fiber layers in the stick. The result is better carbon fiber compaction for remarkable durability and consistency in the shaft. This shaft uses a traditional geometry with square-corners and strategically placed tactile texture is utilized with a grip finish. There is a very slight gradual taper because of the mid kick flex profile to a nice transition where the blade and the shaft meet. On the inside of the matte finished blade, is the Ultra Attackframe tech mentioned above with a lightweight quality foam core between the frame and bridges. CCM is also offering a pro flex in the Ultra Tacks line. The 105 and 95 flex options are available with an additional 3 inch extension in stick length for the bigger and stronger players looking for a stiffer and taller stick. CCM strived for an incredibly durable stick that would provide legendary accuracy and performance. If you are an elite level player that values precision, accuracy, and consistency (all qualities of a sniper), then check out CCM’s Ultra Tacks hockey stick made to light the lamp. Les mer

For the first time ever, CCM is introducing a top-of-the-line, composite, CCM Tacks STICK line! The CCM Tacks 5052 Grip Composite Stick features the same feel and T-geometry as the top-of-the-line Tacks stick. It also features a true mid kickpoint, which is something that CCMs stick catalogue had been lacking until now. The Tacks 5052 Grip Composite Stick features CCM's ATTACKFRAME which refers to the all-new, extra-stiff blade design which minimizes torsional flex, keeping the blade square to the shooters target for maximum accuracy. Also, having such a stiff blade means that this is one stick that should really provide a great pop off the blade. Les mer

In what has become a much anticipated summer tradition in recent years, CCM will be releasing the newest update to their RBZ composite hockey stick line in August. The original RBZ was a great stick that was hugely popular and in conjunction with TaylorMade, CCM has been able to improve on it every year. Theyve continued to make a great stick better and better. The newest version of the stick is called the RBZ SpeedBurner. The RBZ SpeedBurner is the stick designed for pure shooters, looking for the hardest, most powerful shot possible. By comparison, the other sticks from CCM the Ultra Tacks, designed for places seeking the most accurate shots and the Ribcor, for great stick handlers who want to be able to load the stick easily and a really quick release. Power Hosel Technology The biggest upgrade made to the RBZ SpeedBurner is the introduction of CCMs new Power Hosel Technology. With past RBZ models, CCM has been forced to use a more traditional method of fusing the stick together by extending the blade up, into the shaft. Although this was the best technique at their disposal, they did not feel it was an ideal complement to their SpeedBlade Technology. So as theyve don before, they looked to their counterparts at TaylorMade. They saw that with their golf drivers, TaylorMade assembled the clubs by inserting the shaft into the hosel of the club head. CCM took this idea and set out to translate it to the RBZ stick line. They redesigned the lower portion of the RBZ shaft, adding an internal rib and building it to be inserted into the blade. The addition of the internal rib and the new fusion method had direct impacts on the sticks performance, as well as some indirect effects. By inserting the shaft into the blade hosel, the energy transfer of the stick becomes much more efficient. This means that when you flex the shaft while shooting, energy travels through the stick and to the puck quicker with less energy lost. The result is a more powerful shot with a faster release in comparison to previous RBZ models. While the new internal rib also helps to support the efficiency improvements, it more importantly improves the structure and durability of the taper. The rib helps to enhance the rigidity of the lower portion of the stick, leading to more stability on big slapshots. More stability means less blade twisting and torqueing, keeping the blade more square to your target for more accurate shots. Aside from those performance features, the internal rib also helps to improve the impact strength of the lower shaft. That lower shaft area is often the target of impacts, whether it is slashed or lifted by another stick, hitting the post trying to bang home a rebound or giving some pesky little forward a good whack to the shin pads out in front of the net. Improving the impact strength doesnt mean the stick is unbreakable, but it makes it a bit tougher and helps the stick to continue performing like it did the day you got it for a longer period, even after its been slashed a few times. Weight Reduction Even though they added some material with the rib and extended shaft from the new Power Hosel, CCM was still able to reduce the overall weight of the SpeedBurner by 5 grams compared to last years SuperFast. I know what youre thinking, 5 grams So what? It might not seem like much, but look at it this way the lightest 30 (yes, THIRTY) sticks in the game right now are separated by a total of 40 grams. On top of that, the 4th lightest and 30th lightest sticks are only 22 grams different in weight. Long story short When talking about top end hockey sticks, 5 grams is a significant weight reduction. RBZ Flex Profile & Blade Technology There are two big that the RBZ line has come to be known for, the flex profile and the unique blade construction. Although CCM has consistently updated and improved those two features, theyve been able to do so without alienating the players who love the stick by changing the feel and performance that won them over. Custom Kick Point The SpeedBurner is designed for players seeking the hardest shot possible and will still feature CCMs Custom Kick Point or Constant Stiffness Profile. This means the stick is going to flex from wherever your lower hand is. This gives you great performance on all types of shots and its what makes the RBZ line such a popular all-around shooting stick. The SpeedBurner maximizes the energy loaded into big slap shots and optimize the amount of energy loaded into quicker snap and wrist shots, giving you the most possible power on both types of shots. Since the stick reacts to the placement of the bottom hand during a shot, it will feel easier to load, giving the feeling of more power coming out than you put in. Since the stick is equally stiff through the entire shaft, it has an extremely smooth load and release when shooting. Speed Pocket Blade Technology The RBZs unique blade construction has always been a stable of the line. The goal as always has been to maximize the blades Coefficient of Restitution (C.O.R) or trampoline effect, to make the puck jump off the blade on shots. Unlike other blades on the market, which are filled with various types of foam, the RBZ line is hollow; creating what CCM calls the Speed Pocket. Like past RBZs, the SpeedBurner blade takes many cues from golf drivers in the way it is designed, tested and how it performs. With SpeedBurner, CCM wanted to maximize C.O.R., and increase the size of the sweet spot of the blade. A bigger sweet spot allows for the same feeling of the puck jumping off that hot blade face, even when you dont contact the puck exactly where you want to on the blade. Due to the introduction of the Power Hosel and the new way the stick is assembled, CCM was able to reexamine, rework and optimize the Speed Pocket blade to realize these goals. Some other great RBZ SpeedBurner features The new RBZ SpeedBurner will have a few features continuing forward from past models that have been slightly tweaked, as well as some continuing forward as they were. Since its introduction, the RBZ line has always had a focus on optimizing the swing weight of the stick and SpeedBurner has the lowest swing weight for the RBZ lines to date. Swing weight is predicated on the distribution of the weight throughout the stick. The swing weight of a stick basically does two main things; it influences how light or balanced the stick feels and helps shooters to maximize the speed of their swing on slapshots. The lowered swing weight of the RBZ SpeedBurner will help shooters to gain more speed on their downswing and generate more power on shots. Like the past RBZ sticks, the SpeedBurner will feature CCMs T-Geometry shaft. T-Geometry is a squared shaft allowing for better control when shooting. The square corners help to prevent the shaft from spinning in your hands when shooting, helping to increase accuracy. Les mer

At the bottom and the most affordable of the Stage 2 line is the RBZ 40 Composite Stick by CCM. The RBZ 40 offers durability which is great for recreational and entry-level players. The design is one of the biggest changes to the Stage 2 line. A dark upper half of the stick contrasts with the white bottom half, and a black strip finds itself on the top of the blade and lower portion of the shaft. The reason for the altered color scheme was well thought out by the design team at CCM---leaving the lower half white makes the stick difficult for a goalie to distinguish from the white ice and boards, while adding black on the top of the lower shaft and blade makes the stick more visible in your peripherals while stick-handling. The shaft of the RBZ 40 is designed with a balance between weight and flex distribution to give you more torque on your follow-through and a quicker release. The constant stiffness of the shaft gives you a customized kick point for optimal loading. The High C.O.R. blade continues the trampoline effect much like what is built into the higher end RBZ models. This translates to a blade that releases stored energy upon impact, resulting in harder passes and heavier shots. Keep the money in your pocket while still putting the puck in the back of the net, with the RBZ 40 Composite Stick by CCM. Les mer

The revolutionary RIBCOR is back with upgrades and reinforcements making it the best Ribcor stick yet! By utilizing the most cutting edge technologies and materials available, the new CCM Ribcor 40K (powered by Reebok) brings us a stick with superior durability and unbelievable pop! The RIBCOR series, now proudly boasting the CCM name, is all about having a stick that is easier to load and more efficient at generating power for your shot. The quick release of the stick comes from the low-mid kick point, while still providing excellent control and accuracy from the stiffness of CCM’s new SXX2 blade. Predominantly subdued black and grays with neon green accents give the new Ribcor 40K just the right amount of visual flash. CCM uses high modulus carbon fiber for this stick. The orientation of these fibers creates the High Power Taper Ratio, which means that it has a stiffer top and bottom in relation to the front and back of the shaft, resulting in less twisting on shots and more direct power transfer. The senior shaft uses a Traditional geometry with square-corners, while the intermediate and junior uses a more contoured geometry with rounded corners for a better fit in smaller hands. CCM’s Ribcor technology consists of carbon fibers which are permanently in tension due to the unique (and visible) RIB geometry through the taper of the shaft. This means that less effort is required to load the fibers of the shaft because they are already part way there. The preloaded Fibers result in a load, release, and feel unlike any other on the market. Simply put, this stick wants to shoot! It’s no wonder the Ribcor is the preferred weapon of choice by NHL pros such as Matt Duchene and John Tavares. Perhaps the biggest addition to this year’s Ribcor offering is the Technora Aramid Fiber reinforced shaft. Technora is a patented, synthetic fiber that has been trusted and used in the automotive and aerospace industries for years. The same material used in parachutes, body armor, and jet engines now reinforces the shaft of the new CCM Ribcor 40K, resulting in a new level of durability and ensuring the pop of the new 40K lasts game in and game out! The SXX2 blade is designed to go from stiff in the heel to extra stiff at the toe. Internal reinforcements run along the length of the blade acting as bridges to provide a stiff feel throughout that gain even more rigidity at the toe. CCM has gone a step further by angling these reinforcements upward at the toe for an even stiffer toe than before, which helps keep the blade square to the target. The blade also features what Reebok likes to refer to as their Tri Matrix construction. This is also where the orientation of the fibers comes in to play. The 45° orientation stores and releases energy, while the 0° and 90° orientation adds strength and stability - blade technology that's designed to enhance performance and accuracy of your powerful shot. Les mer

CCM has taken huge strides to take an already successful product from Reebok and revamp it for 2014! You might be thinking that this stick looks familiar. Previously known as the Reebok RIBCOR, CCM has taken this product and added some key upgrades to a stick that was already top notch. You'll remember that the original RIBCOR displayed the all-new, revolutionary RIBCOR shaft design which features carbon fibers that are permanently in tension. This construction helps to maximize the energy transfer from your hands, through the shaft, and to the puck. Also, returning for the newest RIBCOR stick, is CCM's Tri Matrix fiber construction. This technology is engineered to feature one layer of 90 degree fibers between two layers of 45 degree fibers. These layers are meant to work together, in the sense that the 90 degree layer is ideal for maintaining strength and durability, while the surrounding 45 degree layers are designed to store and release all the energy when you load up your shots! There have been a couple upgrades to the CCM RIBCOR 40K, as there is with any new release stick. First off, the blade construction has been upgraded. This year, the RIBCOR will feature CCM's SSX2 Blade which is the second coming of last year's SSX blade. The blade is built with a stiff heel, and gets even stiffer as you make your way to the toe, which is extra stiff at the end. The blade is designed like this to ensure that it maintains its shape through any and all shots. This means that wherever you launch your shot from, the torsional flex will be limited, ensuring that your blade is facing your target throughout the shot, and keeping your accuracy on point. Also updated, was the way that CCM wil reinforce this stick. We all know the advantages of the RIBCOR design and its tightly wound fibers. They store energy and keep the stick durable. But this year, the CCM RIBCOR 40K will feature CCM's TECHNORA reinforcement. TECHNORA is an aramid fiber that is commonly found in products demanding high durability and performance, such as automobile bodies and wind surfing sails. What this means for your stick is great durability and improved long-term performance! Order one today and discover why CCM chose to throw down all of their latest technologies into the brand new CCM RIBCOR 40K! - See more at: https://www.purehockey.com/ccm-ribcor-40k-senior-composite-stick#product_tabs_description_tabbed Les mer

The RIBCOR series of sticks puts carbon fibers in tension for an explosive release every time you unload. The RIBCOR 28K, which weighs in at 515 grams (senior), features easy-to-load technology that provides you with a professional stiffness profile that mirrors the top-of-the-line RIBCOR shaft. The 3:1 power taper provides you with more vertical stiffness, which allows for less energy wasted down through the ice. Basically, every ounce of strength you put into your shot will go into the loading of the stick. The SXX Blade is stiff in the heel to extra stiff in the toe, helping to keep the blade square to the target. This helps you have an improved puck feel and keeps the blade honest on every shot. The tacky texture of the grip material gives you a better feel hand-to-stick, providing you with the comfort to go for the stretch poke checks or make some moves with the puck you may not have tried before. Les mer

For 2014 CCM is introducing a composite, CCM Tacks STICK line! The CCM Tacks 3052 features the same feel and T-geometry as the top-of-the-line Tacks stick, only at a fraction of the cost! It also features a true mid kickpoint, which is something that CCMs stick catalogue had been lacking until now. The CCM Tacks stick features their ATTACKFRAME which refers to the all-new, extra-stiff blade design which minimizes torsional flex, keeping the blade square to the shooters target for maximum accuracy. Also, having such a stiff blade means that this is one stick that should really provide a great pop off the blade. The Tacks 3052 will be a solid, durable option for anyone that is looking for a dependable stick. Les mer