The Vapor family of skates continues to be the most popular family within Bauer's 3-fit platform. Although still considered a Vapor skate, the X200 goes a little outside of the typical “Vapor” fit. Instead of the standard V-fit profile (standard width through toebox, narrower fit in the heel and ankle) we are used to seeing on the Vapor line, the 200 is less snug and closer to a classic style fit. Unlike its other Vapor counterparts, the X200 features only a sublimated premium nylon quarter package and will not have the OD1N concept skate-inspired thermoformed X-rib pattern. And although you cannot heat mold this skate to your foot, the quarter package will still provide adequate support during tight turns and quick cross overs. Looking inside the boot, the X200 uses a microfiber liner, which provides ultimate comfort throughout your time on the ice. While the tongue is a 1-piece felt design, composed of a 30z white felt. The boot sits atop an injected TPR outsole, which is a commonly used material for which to mount the Tuuk Lightspeed Pro holder which houses the non-removable Tuuk Stainless Steel runner. Les mer

Les mer

CCM Tacks 1092 Junior Ice Hockey Skates Les mer

Les mer

Les mer

For a performance-level, affordable ice hockey skate, the CCM Jetspeed FT360 offers a lot of value for the money. Key upgrades to the steel holder and tongue bump the skate’s overall quality, making it one of the best buys on the market at this price point. SpeedBlade 4.0 holder for improved energy transfer and aggressive turning radius Bottom vent for moisture release and quick dry times Heat moldable, synthetic composite quarter package with reinforcement core for enhanced power, stiffness, and longevity Heavy-duty microfiber liner with DuraZone abrasion protection for long-lasting comfort 7 mm tongue with injected lace bite guard for impact protection Anatomical Response footbed for contoured support The blade holder in the FT360 has been upgraded to the SpeedBlade 4.0—the same holder used on the top-end FT1 skate. The holder features CCM’s SpeedRib design, adding strength and stability, thanks to its unique geometric construction. The triangular figuring will improve energy transfer through the skate by reducing torquing, helping players enjoy their maximum stride power, along with an improved bite and turning radius in the skate’s removable SB stainless steel blades. The SpeedBlade 4.0 holder is joined to an injected and embossed plastic outsole that includes a bottom vent for moisture release. The vent helps keep players’ feet dry during the game, and speeds up dry-times afterwards. The embossing adds additional stiffness for increased energy transfer. The FT360 quarter package comes in CCM’s synthetic composite shell, with a foam core for increased stiffness over the FT350 model. The stiff shell helps improve stride power, and the foam core, together with the composite shell, molds to the foot for a shorter break-in time and a more personalized fit. The boot includes a semi-flexible tendon guard with double stitching for improved durability, and comes with a thick, 7mm., two-piece felt tongue for a comfortable, anatomical fit and feel. The tongue is upgraded with center-injected foams and includes an embossed lace guard. Combined, these features offer better protection for the top of the foot from pucks, slashes, and lace bite. The FT360 boot features CCM’s DuraZone patches at the top of the quarter liner to help reduce abrasions caused by shin guards. If you wear your guards beneath the skate tongue, they often wear into the quarter package interior—a problem the DuraZone patches address. The rest of the liner is a heavy-duty microfiber material that’s comfortable and soft to the touch, and does an excellent job wicking moisture not released through the skate’s bottom vent. The FT360 comes with CCM’s Anatomical Response footbed, giving players a contoured fit for excellent support and comfort. The FT360, like all Jetspeed skates, is a medium-volume skate, but its fit shades toward the tighter side in the heel and forefoot. If you’re a person with an in-between-sized foot, Jetspeeds might be perfect for you. The upgraded, performance-level FT360 skate offers a lot of value in an eminently affordable package. Its removable blades and protection features make CCM’s FT360 one of the best performance ice hockey skates on the market. Les mer

CCM Tacks 5092 Senior Ice Hockey Skates Les mer

CCM Ribcor 48K Senior Ice Hockey Skates Les mer

Les mer

Les mer

CCM Tacks 4092 Youth Ice Hockey Skates Les mer

Reebok 11K PUMP Junior Ice Hockey Skates Les mer

The Nexus N6000 skates feature a quarter package comprised of a lightweight mesh. This is the perfect entry level skate for players looking for a deep classic fit at a fraction of the cost. The classic fit profile features a traditional “Deep-V” heel shape, combined with an anatomically molded upper. The result is a boot that provides a comfortable, secure heel lock, while allowing for better wrap along the top of the foot. These fit characteristics amount to a boot that is comfortable right out of the box, and is very accommodating to players with higher volume feet. The felt tongue features a metatarsal guard that helps provide comfort and protection on the ice. The N6000 will also feature a brushed nylon liner on the inside of the boot to keep the skate feeling comfortable. Add Bauer’s Molded EVA footbed and you have a complete package of comfort and performance. The boot sits atop Bauer’s TUUK Lightspeed pro holder and is accompanied by non-replaceable TUUK stainless steel runners. For a wider and higher volume skate at a great price, check out the Bauer Nexus N6000 skates. *Description and images listed may differ from the actual youth model received. Les mer

Bauer Reakt Junior Ice Hockey Skates Les mer

Take all the features and technologies that make Vapor skates great, upgrade them, and combine them into an aesthetically pleasing, pro-level package, and you’ve got the latest Bauer Vapor S17 1X ice hockey skate. The 1X brings a little of the NHL to the local rink for elite- to pro-level players who demand the best features and technologies a pair of skates can offer. Tuuk LightSpeed Edge for trigger-quick blade replacement Carbon composite, vented outsole for dry, breathable support 3-D Lasted Curv Composite quarter package for lightweight, rigid support Asymmetric quarter dimensions for anatomical power generation Curv Composite ankle support FlexLock Pro tongue with thermoformable composite center for custom impact protection LockFit dual-zone liner with Anaform ankle pads for comfort and foot stability Anaform Speed Plate footbed for customized support and comfort The top-line Vapor 1X hockey skate includes the Tuuk LightSpeed Edge holder, the most popular holder in the NHL right now, thanks to Tuuk’s innovative trigger-release system. Now a player can change blades in seconds, for more time on the ice and less time on the bench. The Tuuk holders are also three millimeters taller this year in both front and rear posts, for an improved turning radius. The holder is attached to a fully carbon composite, vented outsole. The carbon composite is extremely lightweight and rigid, for excellent energy transfer. The innovative bottom vents—used only in the 1X line—allow moisture to drain during the game and help the skates to dry quickly after the game’s over. The Vapor 1X quarter package is Bauer’s very stiff yet lightweight 3-D Lasted Curv Composite material. The Carbon Curv is also highly thermoformable, so skaters will enjoy a contoured, custom fit after the skates are baked. The 1X quarter package features asymmetrical dimensions, where the inside of the boot extends farther than the outside for a better, anatomical fit around the ankle bones, which are themselves typically asymmetrical. Common sense design. Since much of a skater’s power derives from the inside of the foot, the new boot dimensions deliver a better base of support and improved energy transfer. Combined with the flexible tongue, the Vapor 1X quarter package promises skaters a better attack angle for maximum stride power. The lace eyelet system in the top-end Vapor has also been updated for improved, locked-in stability. The top of the boot features a comfort edge wrap to reduce abrasions from the rigid 1X boot. And the 1X includes a Curv Composite ankle support—a feature found only in this skate—for a lighter, stiffer response. The 1X tongue is a 3-piece, FlexLock Pro model with class-leading thickness and comfort. The newly added thermoformable composite material down the tongue center not only offers excellent impact protection, but also promises a custom fit once baked. The 1X comes with Bauer’s Lock-Fit Pro liner with memory foam padding for comfort. The slightly abrasive liner will help lock the skater’s foot to the boot, thanks to its dual-zone texture. The liner has a tacky upper for stability and a smoother lower portion for premium comfort. The 1X footbed is an Anaform Speed Plate with Ortho-resin technology. The speed plate is fully thermoformable for a customized heel cup and arch support, helping balance the skater’s weight across the boot, heel to toe, for maximum power efficiency and custom comfort. There’s almost too much to say about the Vapor 1X. Bauer has put all its best, most innovative thinking into the top-end, elite model. Pro-level players will find a lot of value in all the design features and technological updates that help make the Bauer Vapor 1X skate one of the best money can buy. Les mer

The Tacks 6092 skate offers up a huge value at its price point. Although this is not the absolute top of the line model, many of those top tiered features trickle down to the 6092 to provide a comfortable and high performing skate for elite skaters. More importantly, CCM altered the fitting characteristics of this Tacks line to be more anatomical right out of the box. Getting right into the boot construction, CCM used a high end, textured, and layer-formed boot frame that has that metallic mesh look. It has strategic reinforcements used to promote elite level support with effortless energy transfer, combine all this with the Tacks AttackFrame composite core and you get a boot that is lightweight, rigid, and thermo-formable to give an anatomical and customized fit all around the skate. This fit profile provides a close fit in the heel and ankle with a medium width throughout the boot. Like the Super Tacks, the 6092 features CCM’s premier skate lining, TotalDri Liner. This is a lightweight liner that wicks away moisture very quickly and works well with the vented exhaust system placed on the outsole of the skate. These features work together to push any moisture out of the boot, keeping the skate even more lightweight and comfortable. On the inside, symmetrical multi-density memory foam pads wrap around the players foot to further enhance the customized fit and overall comfort. Another nice little feature are the smooth contour comfort pads found along the neck/collar of the skate to alleviate any pressure put on the ankles during turning. Moving to the tongue, CCM used a 7mm traditional felt tongue equipped with reinforcement layers to increase comfort around the front of the ankle as well as providing excellent protection with an injected lace-bite protector. Lastly, we see the SpeedBlade 4.0 Holder which provides an additional four millimeters of height (when compared to the older E-Pro holder) mounted to the 6092. This holder allows for a greater angle of attack and more aggressive turns. Complementing the SpeedBlade 4.0 Holder is CCM’s SpeedBlade Stainless Steel runner. This is a high grade steel that provides a long lasting edge for long term performance. High end, texturized, layer-formed boot frame with strategic reinforcements, elite level support and energy transfer design Lightweight, rigid and thermo-formable AttackFrame core for maximum performance. High performance moisture-wicking material keeps feet dry and skates light Soft pad around collar of the boot for excellent foot and ankle comfort Symmetrical foam comfort pads wrap around player’s foot for customized fit and comfort 7mm felt with reinforcement layers for increased comfort and protection Stiff profile that helps generate energy transfer with every stride and air vent to keep feet dry and skates light CCM Fit System footebed provides great support and comfort SpeedBlade 4.0 for proven durability with increased attack angle providing greater strides and cornering SpeedBlade Stainless provides a long lasting edge for long term performance Les mer

Always Be Ahead of the Game with the CCM Tacks 2092 skate. Featuring a synthetic Form Boot, a two-tone brushed micro-fiber liner and an injected outsole, the Tacks 2092 was designed for players who are looking for that extra jump right out of the gate. A durable outer shell with excellent foot support and comfort Two-Tone Brushed Micro-Fiber tongue Provides comfort and a resistance to wear and tear 5mm felt tongue for comfort and protection Solid energy transfer outsole profile Our CCM footbed provides for excellent support and comfort Non replaceable stainless steel blade with elevated heel holder for increased attack angle providing for greater strides and edgework Les mer

Les mer

Reebok 19K PUMP Junior Ice Hockey Skates Les mer