The CCM Ribcor Trigger ASY is the top of the line model of the new Ribcor stick line for 2016. Ribcor has always been about generating efficient loading to achieve a quick releasing shot in a low-kick package. With familiar technologies in Pop Matrix and Technora, CCM changed it up and added new features to optimize performance throughout the entire stick. No doubt the biggest change coming in this stick is going to be the new ASY-1 flex profile. This is not to be confused with the flex point, which thanks to PopMatrix technology is a low kick point. The Trigger features a completely new layup that was developed to maximize the performance of every single fiber in the stick by strategically layering and angling the fibers in certain areas of the stick. This allows for an even quicker release all designed and tested from NHL player feedback and the CCM performance lab. This new layup also accentuates the PopMatrix technology giving shooter’s the ability to get their shots off as quickly as possible. The Trigger features PopMatrix technology which was last seen in the Reckoner. PopMatrix is a unique visual technology that consists of carbon fibers which are permanently in tension due to the unique concave geometry through the taper of the shaft. The idea of this is to get easy loading, more efficient energy transfer and a faster snap back as quickly as possible. CCM has been able to come up with quantifiable measurements to show that the Trigger has the highest release rate from a CCM stick to date. The performance fibers that are found in the rib are also protected by an outer layer composed of protective fibers to put durability issues to rest. This all translates into less effort required to load the fibers of the shaft, which results in a load, release, and feel unlike any other on the market. As the Ribcor line has become linked to Technora Technology, it’s to no surprise that the CCM Trigger will be featuring the Aramid Fiber reinforcements running through the lower third of the stick. Technora is a patented, synthetic fiber similar to Kevlar that boasts a high tensile strength and better bending properties, which is why it has been trusted and used in the automotive and aerospace industries for years. The same material used in parachutes, body armor, and jet engines now reinforces an area of high wear and tear, the slash zone. This is beneficial in helping to take this stick to high levels of durability and ensuring the longevity of the pop life game in and game out for an overall better performing stick. Moving down to the blade, the Trigger comes equipped with the new Ascent 2 blade. The Ascent 2 is rooted from its predecessor the Ascent, found in the Reckoner, but comes with a few changes in this Trigger model. As CCM’s dangler stick, they really wanted to promote that great feel any puck handler would desire, so to achieve this CCM raised the one internal support bridge a bit higher to allow the puck to make more contact with the premium foam in the blade. While the feel of this blade will be softer to provide those soft hands, the toe is still stiff to provide accurate and quick releasing shots off the toe. Simply put Ascent 2 is lighter, provides more feel, accurate and full of pop. The new Ribcor Trigger ASY-1 stays true to the DNA of the Ribcor line while, once again, improving its feel and performance. Check out the Trigger today for MAXIMUM POP. Les mer

The revolutionary RIBCOR is back with upgrades and reinforcements making it the best Ribcor stick yet! By utilizing the most cutting edge technologies and materials available, the new CCM Ribcor 40K (powered by Reebok) brings us a stick with superior durability and unbelievable pop! The RIBCOR series, now proudly boasting the CCM name, is all about having a stick that is easier to load and more efficient at generating power for your shot. The quick release of the stick comes from the low-mid kick point, while still providing excellent control and accuracy from the stiffness of CCM’s new SXX2 blade. Predominantly subdued black and grays with neon green accents give the new Ribcor 40K just the right amount of visual flash. CCM uses high modulus carbon fiber for this stick. The orientation of these fibers creates the High Power Taper Ratio, which means that it has a stiffer top and bottom in relation to the front and back of the shaft, resulting in less twisting on shots and more direct power transfer. The senior shaft uses a Traditional geometry with square-corners, while the intermediate and junior uses a more contoured geometry with rounded corners for a better fit in smaller hands. CCM’s Ribcor technology consists of carbon fibers which are permanently in tension due to the unique (and visible) RIB geometry through the taper of the shaft. This means that less effort is required to load the fibers of the shaft because they are already part way there. The preloaded Fibers result in a load, release, and feel unlike any other on the market. Simply put, this stick wants to shoot! It’s no wonder the Ribcor is the preferred weapon of choice by NHL pros such as Matt Duchene and John Tavares. Perhaps the biggest addition to this year’s Ribcor offering is the Technora Aramid Fiber reinforced shaft. Technora is a patented, synthetic fiber that has been trusted and used in the automotive and aerospace industries for years. The same material used in parachutes, body armor, and jet engines now reinforces the shaft of the new CCM Ribcor 40K, resulting in a new level of durability and ensuring the pop of the new 40K lasts game in and game out! The SXX2 blade is designed to go from stiff in the heel to extra stiff at the toe. Internal reinforcements run along the length of the blade acting as bridges to provide a stiff feel throughout that gain even more rigidity at the toe. CCM has gone a step further by angling these reinforcements upward at the toe for an even stiffer toe than before, which helps keep the blade square to the target. The blade also features what Reebok likes to refer to as their Tri Matrix construction. This is also where the orientation of the fibers comes in to play. The 45° orientation stores and releases energy, while the 0° and 90° orientation adds strength and stability - blade technology that's designed to enhance performance and accuracy of your powerful shot. Les mer

The next generation of the legendary Tacks name is here and better than ever, and with it comes a beefed up line of CCM’s most durable sticks to date. With RBZ offering a custom kick and Ribcor offering a quick release low kick, CCM caters to the snipers with a mid-kick point in the Ultra Tacks. The Ultra Tacks was designed to provide unmatched accuracy and precision in a high performance lightweight and durable stick. CCM found success with Attackframe technology, which was featured in the original Tacks stick, only to one up it with a much lighter version of the same tech now dubbed Ultra Attackframe. Engineers designed their blade to have a structure with a strong outer frame and two stiffer bridges that run heel to toe. The stiff reinforcements that run across the blade help to increase bending stiffness and torsional rigidity which prevents any twisting of the blade and keeps you square to your target while delivering consistent and accurate shots. By reducing the weight of the blade you get a better overall balanced feel which in turn promotes a higher performing stick and more accurate shots. Another benefit of having this stiffer blade is the durability factor as well as reliability. With the Ultra Attackframe technology, pro testimonials state that their Tacks stick is lasting longer while providing that same feel they had the first day they received their stick, giving them the consistency needed to perform. Featuring Bumper technology in the shaft, the Ultra Tacks stick has become one of CCM’s strongest and longest lasting sticks to take durability to the next level. The majority of hockey sticks break when you receive a slash which then damages a corner of the shaft. Now apply more force onto that damaged area while you shoot or stick check and SNAP! What happened is when force was applied, the layers of carbon fiber started to separate and weaken the stick to the point of breakage. Bumper technology is the addition of more material to the inside of the shaft corners which prevents the separation and breakdown of the carbon fiber layers in the stick. The result is better carbon fiber compaction for remarkable durability and consistency in the shaft. This shaft uses a traditional geometry with square-corners and strategically placed tactile texture is utilized with a grip finish. There is a very slight gradual taper because of the mid kick flex profile to a nice transition where the blade and the shaft meet. On the inside of the matte finished blade, is the Ultra Attackframe tech mentioned above with a lightweight quality foam core between the frame and bridges. CCM is also offering a pro flex in the Ultra Tacks line. The 105 and 95 flex options are available with an additional 3 inch extension in stick length for the bigger and stronger players looking for a stiffer and taller stick. CCM strived for an incredibly durable stick that would provide legendary accuracy and performance. If you are an elite level player that values precision, accuracy, and consistency (all qualities of a sniper), then check out CCM’s Ultra Tacks hockey stick made to light the lamp. Les mer

The Reckoner is the next volume in the Ribcor saga. The stick comes with the traditional Ribcor features which is to provide optimized puck feel, and to give the shooter the quickest release. While also offering the new Reckoner has a concaved hosel section that will replace the previous multiple-rib design, referred to by CCM as PopMatrix Technology. The Ribcor has been among the most popular hockey sticks for Pro Players for the past three seasons! Les mer

* Les mer