Søkeresultater for 'game changer'

Take all the features and technologies that make Vapor skates great, upgrade them, and combine them into an aesthetically pleasing, pro-level package, and you’ve got the latest Bauer Vapor S17 1X ice hockey skate. The 1X brings a little of the NHL to the local rink for elite- to pro-level players who demand the best features and technologies a pair of skates can offer. Tuuk LightSpeed Edge for trigger-quick blade replacement Carbon composite, vented outsole for dry, breathable support 3-D Lasted Curv Composite quarter package for lightweight, rigid support Asymmetric quarter dimensions for anatomical power generation Curv Composite ankle support FlexLock Pro tongue with thermoformable composite center for custom impact protection LockFit dual-zone liner with Anaform ankle pads for comfort and foot stability Anaform Speed Plate footbed for customized support and comfort The top-line Vapor 1X hockey skate includes the Tuuk LightSpeed Edge holder, the most popular holder in the NHL right now, thanks to Tuuk’s innovative trigger-release system. Now a player can change blades in seconds, for more time on the ice and less time on the bench. The Tuuk holders are also three millimeters taller this year in both front and rear posts, for an improved turning radius. The holder is attached to a fully carbon composite, vented outsole. The carbon composite is extremely lightweight and rigid, for excellent energy transfer. The innovative bottom vents—used only in the 1X line—allow moisture to drain during the game and help the skates to dry quickly after the game’s over. The Vapor 1X quarter package is Bauer’s very stiff yet lightweight 3-D Lasted Curv Composite material. The Carbon Curv is also highly thermoformable, so skaters will enjoy a contoured, custom fit after the skates are baked. The 1X quarter package features asymmetrical dimensions, where the inside of the boot extends farther than the outside for a better, anatomical fit around the ankle bones, which are themselves typically asymmetrical. Common sense design. Since much of a skater’s power derives from the inside of the foot, the new boot dimensions deliver a better base of support and improved energy transfer. Combined with the flexible tongue, the Vapor 1X quarter package promises skaters a better attack angle for maximum stride power. The lace eyelet system in the top-end Vapor has also been updated for improved, locked-in stability. The top of the boot features a comfort edge wrap to reduce abrasions from the rigid 1X boot. And the 1X includes a Curv Composite ankle support—a feature found only in this skate—for a lighter, stiffer response. The 1X tongue is a 3-piece, FlexLock Pro model with class-leading thickness and comfort. The newly added thermoformable composite material down the tongue center not only offers excellent impact protection, but also promises a custom fit once baked. The 1X comes with Bauer’s Lock-Fit Pro liner with memory foam padding for comfort. The slightly abrasive liner will help lock the skater’s foot to the boot, thanks to its dual-zone texture. The liner has a tacky upper for stability and a smoother lower portion for premium comfort. The 1X footbed is an Anaform Speed Plate with Ortho-resin technology. The speed plate is fully thermoformable for a customized heel cup and arch support, helping balance the skater’s weight across the boot, heel to toe, for maximum power efficiency and custom comfort. There’s almost too much to say about the Vapor 1X. Bauer has put all its best, most innovative thinking into the top-end, elite model. Pro-level players will find a lot of value in all the design features and technological updates that help make the Bauer Vapor 1X skate one of the best money can buy. Les mer

The TRUE XC9 shin guards are built for speed, with a lightweight design and plenty of performance features to help keep your skating quick without sacrificing protection or comfort. Anatomical fit for great mobility Strategically placed straps for a personalized fit Adjustable liner for dry comfort Buying the right pair of shin guards is all about finding the right fit and style for your game. The right fitting equipment will help you stay protected on the ice while also benefiting your performance. If you’re unsure which size or style of shin guard is right for you, or you’re looking for an accurate assessment, visit your local Pure Hockey store. The XC9 shin guards have an anatomical design, providing a lightweight feel and added mobility to enhance your skating stride. But this construction doesn’t sacrifice protection. This fit provides optimal coverage and quality shock absorption in the shin caps and calf area. TRUE includes strategically placed straps to offer a customized fit. With a wrap-around knee strap and a thick, durable calf strap, TRUE ensures the XC9 guards will stay locked in place, prohibiting any excess shifting of the pads to enhance the protective features while offering solid freedom of movement to support your stride. Inside the shin guards, TRUE offers an adjustable and removable liner. This design allows you to place the liner in the position that offers you the most comfort, and also provides the ability to remove it for cleaning, helping to keep your pads fresh throughout the season, no matter how frequently you skate. This liner also has excellent moisture-wicking properties, keeping you cool and dry while you play. With plenty of high-end features, the TRUE XC9 shin guards offers a great combination of the protection you need and the lightweight feel you’re looking for. Les mer

The all new TRUE XC9 shoulder pads offer high-end protective features and an innovative adjustability system, providing you with the comfort you want and the protection you need to perform your best on the ice. New adjustability system for a customized fit PE/EVCA shoulder caps for top-end protection EVA foam for great shock absorption in key areas Moisture wicking liner for dry comfort When purchasing new protective equipment, it is vital to find the gear that fits you best. With the right fit, high-end equipment, like TRUE’s new XC9 shoulder pads, will help keep you comfortable and protected every time you hit the ice for a game or practice. TRUE has designed their new XC9 shoulder pads for every player, with plenty of adjustability to make sure your pads fit correctly. This new system includes the ability to adjust the clavicle area, shoulder caps, torso, and bicep pads. With these features, finding the right fit goes beyond just general sizing, as you can adjust these shoulder pads almost everywhere based on protective needs and personal preference. This adjustability system allows you to enhance comfort while also making sure the protective features are situated in the right position. For the protective technologies, TRUE includes their PE/EVCA shoulder caps. This design offers a low-profile look and feel while also enhancing protection with high-quality foams. The XC9 pads also feature EVA foam, a trusted technology used in plenty of high-end protective gear, that is placed in key areas for great shock absorption and resistance against common hockey impacts like body checks and blocked shots. For the interior of the XC9 shoulder pads, a moisture wicking liner to keep the pads lightweight throughout play for added comfort. And after you’re done skating, this liner helps the pads dry out faster so they’re ready to go for your next on-ice session. With a custom fit, great mobility and top-notch protection, TRUE’s new XC9 shoulder pads include all the features you need and prove to be a great value. Les mer

The TRUE XC9 elbow pads are optimized for mobility and protection, with a high-end design and plenty of features included in this new model. 3-piece design for enhanced mobility Molded EVA foam for high-end protection Adjustable strapping system for a custom fit Moisture wicking liner for dry comfort Buying the right pair of new elbow pads is all about finding the right fit and style for your game. The right fitting equipment will help you stay protected on the ice while also benefiting your performance. If you’re unsure which size or style of elbow pad is right for you, or you’re looking for an accurate assessment, visit your local Pure Hockey store. TRUE uses a 3-piece design for their new XC9 elbow pads. This construction, popular among top-of-the-line elbow pads, offers more mobility and coverage, giving you the ability to flex and move your arms more during play which will help with your stickhandling, passing, and shooting, while also providing more overall protection in key areas. For added protection, TRUE includes compression molded EVA foam within the 3-piece design. This technology is strategically placed within the elbow pad to provide you with enhanced shock absorption, helping to protect against impacts like slashes, blocked shots, or contact with the ice and boards. The XC9 elbow pads also include adjustable bicep and forearm straps. This attachment system offers a customizable fit based on personal preference, helping to lock the protective features in place so the elbow pads don’t shift around on your arms during play. Inside the XC9 pads, TRUE includes a moisture wicking liner to keep the pads lightweight throughout play for added comfort. And after you’re done skating, this liner helps the pads dry out faster so they’re ready to go for your next on-ice session. TRUE’s new XC9 elbow pads are an excellent complement to the 2019 XC9 shoulder pads, providing full coverage, plenty of mobility, and the protection you need every time you hit the ice. Les mer

The Winnwell Basic Senior Roller Hockey Girdle is the ideal choice for any roller hockey player or hockey official who needs lightweight protection for their lower half. The Basic RH Girdle is made with a Polyester, Spandex blend which offers comfort, flexibility, and durability. The Perforations in the Girdle offers proper airflow and breathability so you can stay cool throughout a game or practice. The EVA Foam provides great protection and shock absorption in the areas where you need it the most. Overall, the Winnwell Basic Senior Roller Hockey Girdle is loaded with awesome features that will keep you protected all season long. Features Cup Included Perforated and Padded Thigh, Tailbone, Hip Pads Ideal for Roller Hockey Players & Officials Belt Loop with Adjustable Belt and Front Buckle EVA Foam provides great protection and shock absorption Perforations in the Girdle offers proper airflow and breathability Polyester, Spandex Blend offers comfort, flexibility, and durability Sizing (Waist) S: 30" - 34" M: 32" - 36" L: 34" - 38" XL: 36" - 40" Les mer

The CCM Tacks 9060 hockey pant offers solid comfort and mobility without sacrificing protection, ideal for the performance-level players who don’t need a top-of-the-line model for their game but are still looking for a quality pant that will keep them comfortable and help to prevent injuries. 400D nylon construction for reduced weight JDP hip cap for enhanced impact resistance Molded PE for advanced protection in key areas Internal belt system for a custom fit The new 2019 Tacks hockey pant line uses a classic CCM cut with an anatomical fit, offering a construction that is both mobile and protective. The construction in the 9060 also features 400D lightweight, high quality nylon panels which reduce the overall weight of the pants while also optimizing durability. In the hip, CCM uses a pro-level JDP cap construction designed to disperse the force of impact away from the hip joint, while also enhancing overall protection. The hip cap also includes PE foam which further protects this area from common impacts like collisions, contact with the ice, and blocked shots. CCM uses molded PE for advanced protection in key areas of the pant. A molded PE cap is included in both the kidney area and thigh guard of the 9060. The floating thigh guard also includes PE foam for top-end protection and a leg zipper which provides easy access for custom embroidery as well as a personalized fit. For back protection, the Tacks 9060 has a fixed molded PE spine for solid impact resistance in the lower back. Also included in this model is an internal belt system, allowing for a custom fit while also offering a length adjusting zipper. This feature includes a 1-inch length extension for personalization if you need some extra length to your pant based on your height or personal preference for how you want your hockey pants to fit. The Tacks 9060 pant offers the right amount of protection and comfort for the performance player, showing CCM’s commitment to providing all skaters with the right pant based on skill level, frequency of play, and the need for every hockey player to have equipment that keeps them protected. Les mer

Brand new for 2019 are the CCM JetSpeed FT470 Senior Hockey Skates! The CCM JetSpeed FT470 Skates build upon the concepts that made the JetSpeed line one of the best on the market by making key improvements to help maximize comfort, durability, quickness, and top speed! Jumping right into the boot, CCM has gone with a MetaFrame Technology infused quarter package. This lightweight composite boot features an ergonomic shape, which hugs the foot all the way around, ensuring that your heel stays locked in place to help generate maximum speed! The quarter package is constructed with CCM’s RocketFrame composite material. This NHL-caliber material is not only extremely lightweight but features elite levels of protection and durability, as well. CCM incorporated a 7mm felt tongue with molded Lace-bite Protection on their new JetSpeed FT470 Skates. This design provides ultimate protection and comfort and is paired with lace-bite protection that better protects high-wear areas for improved longevity! On the interior of the skates, the JetSpeed FT470 Hockey Skates feature CCM’s HD Microfiber liner. This lightweight material helps wick away any moisture, helping keep your feet dry and your skates light. For durability purposes, CCM included their DuraZone Abrasion Protection. These are abrasion patches that have been added to the interior of the boot where the eyelets are. These are high-wear areas, and by adding this feature, it greatly increases boot durability and comfort. Continuing on the comfort aspect, CCM again incorporated their smooth contour pro padding around the collar of the boot, which provides improved durability and superior foot and ankle comfort. This is partnered with multi-density memory foam in the ankle that wraps anatomically around your foot for a customized fit. Moving to the bottom half of the JetSpeed FT470 Hockey Skates is CCM’s brand new holder, known as the SpeedBlade XS holder! These holders were developed as a quick and easy way to replace blades on the fly, while ensuring you with a consistent feel and performance every time. The holders feature a positive-lock mechanism that tightly secures the blade to the holder to prevent the blade from loosening during gameplay. The consistently tightly-secured blade maximizes energy transfer from the boot to the holder and from the holder to the blade in every stride. If you are a player looking for mid-range skates designed for speed and comfort, look no further than the CCM JetSpeed FT470 Senior Ice Hockey Skates! Les mer

Brand new for 2019 are the CCM Tacks 9080 Senior Shoulder Pads! While offering the same elite-level protection and comfortability, CCM has incorporated a few key features to this new protective line, making it their most advanced line to date! Jumping right into the build of the Tacks 9080 Shoulder Pads, CCM used a Dual-layer stretch base jacket. This Anatomical 3D design and construction prevents the pads from moving around too much, ensuring a close-to-the-body fit! The Tacks 9080 Shoulder Pads also utilize an adjustable strapping system allowing players to customize how the pad feels on their body! Moving to the shoulders of the Tacks 9080 Shoulder Pads, the caps are constructed with a protective and lightweight JDP Foam that provides players with elite-level protection. This goes hand in hand with CCM’s popular D30 Smart material that helps reduce the force of direct impacts from checks! Just below the shoulder caps are the bicep protection pieces with adjustable strapping, giving the players the option to choose how the pads fit around their biceps. Molded-PE Floating foam was used in the sternum and spine areas, further enhancing the protection levels of the Tacks 9080 Shoulder Pads. The D30 Smart material was utilized in these areas again as well, helping to disperse the force of direct impacts in game! Moving to the mid-section, HD foam kidney protection and a removeable belly pad were added! This kidney coverage provides players with even more comfort, and protection to the sensitive kidney areas, ensuring all parts of your upper body are well-covered and protected. On the interior of the Tacks 9080 Shoulder Pads, CCM added a comfort base jacket and mesh liner. This design is made to maximize air flow and mobility keeping the player dry, cool, and keep the pads feeling lightweight throughout the entire skating session! Thanks to the improvised D30 Protection and the addition of the Dual-Layer base jacket, these shoulder pads were built to perform at the highest levels! If you are an elite-level player looking for great protection and comfort in your gear, look no further than the CCM Tacks 9080 Senior Shoulder Pads! Les mer

Brand new for 2019 are the CCM Tacks 9080 Senior Shin Guards! As with the entirety of this new protective line from CCM Hockey, these shin guards were designed to give players elite protection, customizability, and comfort they seek to perform at their highest levels! Starting out with the knee caps, CCM used their JDP cap with their D30 Smart Material! This pro-level construction was designed to disperse the shock of direct impacts such as shots and stick checks away from the knee! The D30 Smart Material provides even more protection when it comes to shock absorption keeping your knees as protected as possible! Moving down to the shin, the Tacks 9080 Senior Shin Guards feature an anatomic-fitting PE shin cap providing players with pro-level protection and durability. Additionally, there is a tape groove allowing players to lock in hockey tape keeping your pads stable all game long! On the calf area of the Tacks 9080 Shin Guards, CCM incorporated a compressed molded foam with PE inserts, providing players with utmost protection and comfort. This calf protection features the D30 Smart Material as well, helps disperse the shock of direct impacts like shots and stick checks! Keeping everything secured is the upper lock strap and the length-adjustable calf strap! This customizable adjustment allows players to choose how the Tacks 9080 Shin Guards fit and feel during gameplay! On the interior of the Tacks 9080 Shin Guards is where you will find CCM’s removable liner featuring a knee cutout. This setup provides a snug, but comfortable, fit. If you are an elite-level player looking for comfort, protection, and customizability in your pads, look no further than the CCM Tacks 9080 Junior Shin Guards! Les mer

Brand new for 2019 are the CCM Tacks 9060 Senior Shin Guards! As with the entirety of this new protective line from CCM Hockey, these shin guards were designed to give players elite protection, customizability, and comfort they seek to perform at their highest levels! Starting out with the knee caps, CCM used their JDP molded-PE knee cap! This high-level construction was designed to disperse the shock of direct impacts such as shots and stick checks away from the knee. Moving down to the shin, the Tacks 9060 Shin Guards feature an anatomic-fitting PE shin cap providing players with pro-level protection and durability. Additionally, there is a tape groove allowing players to lock in hockey tape keeping your pads stable all game long! On the calf area of the Tacks 9060 Shin Guards, CCM incorporated a compressed molded foam with PE inserts, providing players with utmost protection and comfort. Keeping everything secured is the upper lock strap and the length-adjustable calf strap! This customizable adjustment allows players to choose how the Tacks 9060 Shin Guards fit and feel during gameplay! On the interior of the Tacks 9060 Shin Guards is where you will find CCM’s removable liner featuring a knee cutout. This setup provides a snug, but comfortable, fit. If you are a high-level player looking for comfort, protection, and customizability in your pads, look no further than the CCM Tacks 9060 Senior Shin Guards! Les mer

Brand new for 2019 are the CCM Tacks 9060 Junior Shin Guards! As with the entirety of this new protective line from CCM Hockey, these shin guards were designed to give players elite protection, customizability, and comfort they seek to perform at their highest levels! Starting out with the knee caps, CCM used their JDP molded-PE knee cap! This high-level construction was designed to disperse the shock of direct impacts such as shots and stick checks away from the knee. Moving down to the shin, the Tacks 9060 Shin Guards feature an anatomic-fitting PE shin cap providing players with pro-level protection and durability. Additionally, there is a tape groove allowing players to lock in hockey tape keeping your pads stable all game long! On the calf area of the Tacks 9060 Shin Guards, CCM incorporated a compressed molded foam with PE inserts, providing players with utmost protection and comfort. Keeping everything secured is the upper lock strap and the length-adjustable calf strap! This customizable adjustment allows players to choose how the Tacks 9060 Shin Guards fit and feel during gameplay! On the interior of the Tacks 9060 Shin Guards is where you will find CCM’s removable liner featuring a knee cutout. This setup provides a snug, but comfortable, fit. If you are a high-level player looking for comfort, protection, and customizability in your pads, look no further than the CCM Tacks 9060 Senior Shin Guards! Les mer

The Bauer Supreme 2S Pro hockey stick is built for efficiency and power, with the innovation and professional features that elite-level players are looking for in a high kick point model. DuraFlex resin system for increased shaft strength Advanced Carbon Layering for reduced weight without sacrificing durability Renewcore technology for a longer lasting blade Monocomp one-piece construction for enhanced shaft consistency Maximum Power Kick for increased energy transfer New to Bauer’s top-end Supreme hockey stick this year is the Duraflex resin system. While Bauer continues to use its TeXtreme carbon fiber construction in the 2S Pro, the new Duraflex resin increases the entire shaft’s durability and flexural strength. The stick also utilizes the popular Monocomp technology, a carry-over from the Supreme 1S, which provides a true one-piece stick design, producing excellent consistency throughout the shaft. These elite technologies allow you to lean heavier into shots for maximum power. The 2S Pro blade features a key upgrade, Advanced Carbon Layering, which improves the durability-to-weight ratio. The ACL technology produces more carbon fiber layered in a compressed area, increasing the strength of the blade while reducing the stick’s weight. Bauer combines blade innovation with trusted features from the previous model, bringing back their Renewcore technology, which takes a pressurized gel and fills internal blade cracks to create a longer lasting structure. These key features produce a reactive blade for higher shot velocity, without sacrificing strength and durability. The Maximum Power Kick is another carry-over from last year’s 1S model. This technology maximizes the transfer of energy on every shot, with a taper geometry that thickens the hosel area to create a higher kick point, allowing you to generate power from handle to blade. The MPK technology is complemented by the extended transfer zone, allowing you to load your snap shots based on hand positioning for added versatility. Whether you’re firing off a quick snap shot or loading up for a slap shot, the fast recoil and increased energy transfer will provide you with excellent power. The Senior model of the 2S Pro weighs 415 grams, a 5-gram reduction from last year’s 1S model, and features the new P92M blade profile, Bauer’s maximum blade height. With NHL players requesting a taller blade, Bauer delivered, providing the same curve and lie as the standard P92, with the addition of the increased height. This feature helps you in all areas of the game, whether you’re winning a face-off, tipping shots in front of the net, deflecting passes from the opposing team, or collecting bouncing pucks in the corners. Bauer has created its most efficient hockey stick to date in the Supreme 2S Pro, using a winning technological formula to produce a stick made to give you a powerful release. If you’re an elite player looking to take your shot to the next level, the 2S Pro has the features you want. Les mer

Winnwell AMP 500 Shin Guards, Lime & Black, choose your length from the menu Our GX4 Shin Guard combines performance and protection with affordabililty. Its deep moulded knee cap and comfort foam liner focus on providing a level of comfort and protection unmatched at this price point. The inner liner is treated with our patented Cleansport NXT odour management technology keeping our equipment smelling fresh game after game. Les mer

FEATURING BLADELOCK TECHNOLOGY KEEP YOUR EDGE. The new Speedblade Xchange System was developed as a quick and easy-to-use system to swap blades out, while ensuring players a consistently maximized energy transfer and performance. The patent pending BladeLock technology consists of a positive-lock mechanism that improves on “spring-lock” systems and tightly secures the blade to the holder to help prevent the blade from loosening or accidently disconnecting from the holder. BLADELOCK TECHNOLOGY A mechanical lock system that keeps a tight connection between the holder and the runner at all times. QUICK AND EASY TO SWAP BLADES Roll the BladeLock dial until you feel resistance and pull your blade out. Place your new blade into the holder, turn back the dial and you are back in the game. ULTIMATE ENERGY TRANSFER SYSTEM A consistently tightly-secured blade to the holder means that energy transfer from the boot to the holder to the blade is maximized in every stride. Les mer

Hockey training wooden stickhandling ball Great for Pre-Game Warmup Ball measures 2 inches in diameter Swedish Stickhandling Balls Great addition to other Hockey Revolution products Les mer

Brand new for 2018, CCM has overhauled their flagship Premier line and brought out the CCM Premier P2.5 Senior Goalie Glove. Building off of the already successful Premier line, the Premier II has new specs and pieces of technology sure to turn heads. The Premier P2.5 Senior glove has continued the perfect lineage along the CCM Premier yet has the new key features to give goalies extra protection and visibility into the pocket. Starting with the closure of the glove, CCM has kept the same break angle from the old Koho 590, the 60 degree break. This break allows for a natural hand closure while giving the goalie a good catching glove and a good blocking the glove. The One-Piece cuff will give the goalie a larger blocking surface for when they engage in a blocking butterfly, yet the palm will show a large physical shape to the shooter and allow for a natural catch. In the pocket of the glove, CCM has taken the massive success from the EF3 glove and added the Double Straight T as a stock option on the Premier P2.5. This pocket allows the goalie to completely see into the pocket and still yield for a soft catch. At the base of the spine of the T, there is a U shaped design which keeps for a clean attachment point and also promotes an easy break in and game ready feel right out of the box. On the Spines of the glove, they are also stiffened up a bit to help give a better shape and depth to the pocket which will give the goalie the maximum depth allowed to help cradle pucks. Internally, there is a new Velcro setup across the fingers to give a better fit on the inside of the glove. While the rest of the strapping setup will look familiar, this new strap across the back of the hand will create a better overall fit to keep the hand in the glove and give the best closure. Finishing off back of the glove, there is a large padded finger rail which runs along the fingertips which gives extra protection for not only covering pucks, but in the RVH blocking selection as well. This extra rail is a large piece of LD foam which gives that goalie the extra protection they need. If you are an Entry-level butterfly goaltender who is looking for a natural glove closure that presents well to the shooter, look no further than the CCM Premier P2.5 Senior Goalie Glove. Les mer

Brand new for 2017, CCM continues to take the goalie mask category by storm by revamping and improving on their previous designs. The CCM 1.5 Youth Certified Straight Bar goal mask is an NHL inspired shell which includes improvements to increase vision, in the liner and with a lighter shell. The shell of the mask is constructed of a polycarbonate base to provide a protective shell, while staying incredibly light. Inside the shell, there is a VN liner to provide a comfortable foam system giving the goalie the best comfort and protection throughout usage. The Certified Straight cage shape has changed across the bridge of the nose, which will give the goalie improved vision when looking down low. The cage comes to a “point” across the bridge of the nose following the natural shape of the face to crate optimized peripheral and split vision during in game play. If you are an entry-level goalie looking a mask with a pro-inspired design and protection, look no further than the CCM 1.5 Youth Certified Straight Bar Goal mask. Les mer

Developed for the speed of today’s game, the new JetSpeed stick features a hybrid kick point, a new geometry and the Jetstream blade. The new hybrid kick point creates a power hinge effect allowing the player to more fully load the shaft without any twist occurring in the shaft. The new JetSpeed shape provides a unique combination of comfort and control while the JetStream blade employs CCM’s patented multi-channel blade and proprietary dampening material to achieve a blend of lightweight and feel. The final structure is reinforced with 12K woven carbon technology on the blade and c6 weave on shaft, providing great all around stiffness and strength. Les mer

Coming off the successful RBZ line, the QuickLite is the pro model in the latest shoulder pad line from CCM, bringing with it exciting new technology in the same low profile package it’s become famous for. These shoulder pads are all about mobility which is of course promoted by the incredibly lightweight foams used and construction design of the pad itself. The construction of the QLT comes from DryFoam Technology which is a closed cell foam that absorbs less sweat to allow the shoulder pads to remain lightweight and comfortable throughout the game. The combination of VentShield and the premier Zotefoam base are the key components in making these pads not only very protective but also contributes to the pads lightweight. VentShield is the hard perforated plastic found protecting vital organs, while the premier Zotefoam composes the rest of the front and back jackets. The shoulder caps feature a low profile design made with Ufoam construction (EPP/EVA coverage). This keeps the pad light all while offering up pro level protection. Additionally, HD Foam clavicle coverage further adds to that pro level protection as it covers the collar bones. To keep the QLT secured to your body, elastic straps are used everywhere to keep that naturally contoured fit. A nice finishing touch that CCM added is a soft comfort foam pad found on both the front and back of the neck to really promote the level of comfort of these shoulder pads. The QuickLite line keeps that signature RBZ/U+CL color scheme for a really sleek looking pad. All in all, if you are looking for a pad that will keep you incredibly lightweight and mobile, you have to check these out. Les mer