Søkeresultater for 'System'

Take all the features and technologies that make Vapor skates great, upgrade them, and combine them into an aesthetically pleasing, pro-level package, and you’ve got the latest Bauer Vapor S17 1X ice hockey skate. The 1X brings a little of the NHL to the local rink for elite- to pro-level players who demand the best features and technologies a pair of skates can offer. Tuuk LightSpeed Edge for trigger-quick blade replacement Carbon composite, vented outsole for dry, breathable support 3-D Lasted Curv Composite quarter package for lightweight, rigid support Asymmetric quarter dimensions for anatomical power generation Curv Composite ankle support FlexLock Pro tongue with thermoformable composite center for custom impact protection LockFit dual-zone liner with Anaform ankle pads for comfort and foot stability Anaform Speed Plate footbed for customized support and comfort The top-line Vapor 1X hockey skate includes the Tuuk LightSpeed Edge holder, the most popular holder in the NHL right now, thanks to Tuuk’s innovative trigger-release system. Now a player can change blades in seconds, for more time on the ice and less time on the bench. The Tuuk holders are also three millimeters taller this year in both front and rear posts, for an improved turning radius. The holder is attached to a fully carbon composite, vented outsole. The carbon composite is extremely lightweight and rigid, for excellent energy transfer. The innovative bottom vents—used only in the 1X line—allow moisture to drain during the game and help the skates to dry quickly after the game’s over. The Vapor 1X quarter package is Bauer’s very stiff yet lightweight 3-D Lasted Curv Composite material. The Carbon Curv is also highly thermoformable, so skaters will enjoy a contoured, custom fit after the skates are baked. The 1X quarter package features asymmetrical dimensions, where the inside of the boot extends farther than the outside for a better, anatomical fit around the ankle bones, which are themselves typically asymmetrical. Common sense design. Since much of a skater’s power derives from the inside of the foot, the new boot dimensions deliver a better base of support and improved energy transfer. Combined with the flexible tongue, the Vapor 1X quarter package promises skaters a better attack angle for maximum stride power. The lace eyelet system in the top-end Vapor has also been updated for improved, locked-in stability. The top of the boot features a comfort edge wrap to reduce abrasions from the rigid 1X boot. And the 1X includes a Curv Composite ankle support—a feature found only in this skate—for a lighter, stiffer response. The 1X tongue is a 3-piece, FlexLock Pro model with class-leading thickness and comfort. The newly added thermoformable composite material down the tongue center not only offers excellent impact protection, but also promises a custom fit once baked. The 1X comes with Bauer’s Lock-Fit Pro liner with memory foam padding for comfort. The slightly abrasive liner will help lock the skater’s foot to the boot, thanks to its dual-zone texture. The liner has a tacky upper for stability and a smoother lower portion for premium comfort. The 1X footbed is an Anaform Speed Plate with Ortho-resin technology. The speed plate is fully thermoformable for a customized heel cup and arch support, helping balance the skater’s weight across the boot, heel to toe, for maximum power efficiency and custom comfort. There’s almost too much to say about the Vapor 1X. Bauer has put all its best, most innovative thinking into the top-end, elite model. Pro-level players will find a lot of value in all the design features and technological updates that help make the Bauer Vapor 1X skate one of the best money can buy. Les mer

The all new TRUE XC9 shoulder pads offer high-end protective features and an innovative adjustability system, providing you with the comfort you want and the protection you need to perform your best on the ice. New adjustability system for a customized fit PE/EVCA shoulder caps for top-end protection EVA foam for great shock absorption in key areas Moisture wicking liner for dry comfort When purchasing new protective equipment, it is vital to find the gear that fits you best. With the right fit, high-end equipment, like TRUE’s new XC9 shoulder pads, will help keep you comfortable and protected every time you hit the ice for a game or practice. TRUE has designed their new XC9 shoulder pads for every player, with plenty of adjustability to make sure your pads fit correctly. This new system includes the ability to adjust the clavicle area, shoulder caps, torso, and bicep pads. With these features, finding the right fit goes beyond just general sizing, as you can adjust these shoulder pads almost everywhere based on protective needs and personal preference. This adjustability system allows you to enhance comfort while also making sure the protective features are situated in the right position. For the protective technologies, TRUE includes their PE/EVCA shoulder caps. This design offers a low-profile look and feel while also enhancing protection with high-quality foams. The XC9 pads also feature EVA foam, a trusted technology used in plenty of high-end protective gear, that is placed in key areas for great shock absorption and resistance against common hockey impacts like body checks and blocked shots. For the interior of the XC9 shoulder pads, a moisture wicking liner to keep the pads lightweight throughout play for added comfort. And after you’re done skating, this liner helps the pads dry out faster so they’re ready to go for your next on-ice session. With a custom fit, great mobility and top-notch protection, TRUE’s new XC9 shoulder pads include all the features you need and prove to be a great value. Les mer

The TRUE XC9 elbow pads are optimized for mobility and protection, with a high-end design and plenty of features included in this new model. 3-piece design for enhanced mobility Molded EVA foam for high-end protection Adjustable strapping system for a custom fit Moisture wicking liner for dry comfort Buying the right pair of new elbow pads is all about finding the right fit and style for your game. The right fitting equipment will help you stay protected on the ice while also benefiting your performance. If you’re unsure which size or style of elbow pad is right for you, or you’re looking for an accurate assessment, visit your local Pure Hockey store. TRUE uses a 3-piece design for their new XC9 elbow pads. This construction, popular among top-of-the-line elbow pads, offers more mobility and coverage, giving you the ability to flex and move your arms more during play which will help with your stickhandling, passing, and shooting, while also providing more overall protection in key areas. For added protection, TRUE includes compression molded EVA foam within the 3-piece design. This technology is strategically placed within the elbow pad to provide you with enhanced shock absorption, helping to protect against impacts like slashes, blocked shots, or contact with the ice and boards. The XC9 elbow pads also include adjustable bicep and forearm straps. This attachment system offers a customizable fit based on personal preference, helping to lock the protective features in place so the elbow pads don’t shift around on your arms during play. Inside the XC9 pads, TRUE includes a moisture wicking liner to keep the pads lightweight throughout play for added comfort. And after you’re done skating, this liner helps the pads dry out faster so they’re ready to go for your next on-ice session. TRUE’s new XC9 elbow pads are an excellent complement to the 2019 XC9 shoulder pads, providing full coverage, plenty of mobility, and the protection you need every time you hit the ice. Les mer

Bicep: Floating bicep guard withhigh-density foam Forearm: High-density foam Straps: 3-Piece strapping system:Elastic bicep and center straps, forearmoverlap lock strap Cap: Joint discharge PE (plastic) capreinforced with segments of singledensity foam Les mer

MY PUZZLE SYSTEMS PRO is most professional hockey training aid we’ve ever built for off ice training Included: 36 pcs MY PUZZLE SYSTEMS tiles (4 sq.m ) for interactive practice (with symbols and colors) Included: 2 x MY PASSER ONE TIMER with a special fixing system (Euro 59 value each) Make interactive workout with HOCKEY REVOLUTION training app. Improve skills: Stickhandling Shooting Passing Reaction time Peripheral vision Size: 297x135x1,1 cm / 117x53.15x0.43" Ice Feeling: Proffesional Level Free Training System : Hockey Revolution APP Les mer

Construction | 400D textured polyester and side panel reinforcement helps reduce weight and optimize durablilty Thigh Guard | Molded PE plastic and leg zipper for high level protection with custom adjustment Hip/Kidney | Molded PE caps with vented zones for pro level protection with great ventilation Back Protection | Floating spine protector with molded PE cap Adjustment | Internal belt system with hockey lace + hidden 1in. length adjusting zipper Les mer

Construction: 400D textured polyester and side panel reinforcement to reduce weight and optimize durability. Liner: Polyester comfort liner for comfort and durability. Adjustment: Internal belt system with hockey lace for a custom fit that keeps the pant in place. Fit: Tapered, snug fit. Les mer

The CCM Tacks 9060 hockey pant offers solid comfort and mobility without sacrificing protection, ideal for the performance-level players who don’t need a top-of-the-line model for their game but are still looking for a quality pant that will keep them comfortable and help to prevent injuries. 400D nylon construction for reduced weight JDP hip cap for enhanced impact resistance Molded PE for advanced protection in key areas Internal belt system for a custom fit The new 2019 Tacks hockey pant line uses a classic CCM cut with an anatomical fit, offering a construction that is both mobile and protective. The construction in the 9060 also features 400D lightweight, high quality nylon panels which reduce the overall weight of the pants while also optimizing durability. In the hip, CCM uses a pro-level JDP cap construction designed to disperse the force of impact away from the hip joint, while also enhancing overall protection. The hip cap also includes PE foam which further protects this area from common impacts like collisions, contact with the ice, and blocked shots. CCM uses molded PE for advanced protection in key areas of the pant. A molded PE cap is included in both the kidney area and thigh guard of the 9060. The floating thigh guard also includes PE foam for top-end protection and a leg zipper which provides easy access for custom embroidery as well as a personalized fit. For back protection, the Tacks 9060 has a fixed molded PE spine for solid impact resistance in the lower back. Also included in this model is an internal belt system, allowing for a custom fit while also offering a length adjusting zipper. This feature includes a 1-inch length extension for personalization if you need some extra length to your pant based on your height or personal preference for how you want your hockey pants to fit. The Tacks 9060 pant offers the right amount of protection and comfort for the performance player, showing CCM’s commitment to providing all skaters with the right pant based on skill level, frequency of play, and the need for every hockey player to have equipment that keeps them protected. Les mer

Brand new to the CCM protective line, for the 2019-2020 season, are the Tacks 9060 Junior Elbow Pads! With a few key additions, these elbow pads are designed to give players the comfort, and protection they need to perform at their peak levels! Starting at the top of the Tacks 9060 Elbow Pads, CCM went with an articulated bicep using molded foam. This construction provides players with excellent comfort and protection in the bicep area! Just below the bicep protection is the JDP reinforced elbow cap! This lightweight, elite-level construction helps disperse the force of direct impacts away from the elbow joints. Moving down to the forearm, the Tacks 9060 Elbow Pads utilize molded PE foam that provides good protection all the way down the entire forearm to just above the cuff of your gloves. Holding everything in place on the Tacks 9060 Elbow Pads is CCM’s innovative strapping system! The middle lock strap, bicep strap, and nylon forearm strap provide players with an anatomical, 360 degree fit. This keeps the elbow pads close to the body to ensure they stay in place allowing for maximum protection. If you are a player looking for a good protection and comfort, check out the CCM Tacks 9060 Junior Elbow Pads! Les mer

Metaframe technology with synthetic composite boot Speedcore 1 stiffness making it lightweight and rigid HD microfiber liner with durazone abrasion protection Concave reinforced injected outsole with exhaust system 7mm felt tongue with embossed lace-bite protection Anatomical response footbed Speedblade 4.0 holder with speedblade stainless steel runner Les mer

Metaframe technology with synthetic composite boot Rocketframe NHL-caliber lightweight composite material Speedcore 2 stiffness making it more lightweight and rigid HD microfiber liner with durazone abrasion protection Smooth contour soft pad around collar of the boot for excellent foot and ankle comfort Multi density memory foam for customized fit and comfort Concave reinforced TPU outsole with exhaust system 7mm felt tongue with embossed lace-bite protection Anatomical response footbed Speedblade 4.0 holder with speedblade stainless steel runner Les mer

Brand new for 2019 are the CCM Tacks 9080 Senior Shoulder Pads! While offering the same elite-level protection and comfortability, CCM has incorporated a few key features to this new protective line, making it their most advanced line to date! Jumping right into the build of the Tacks 9080 Shoulder Pads, CCM used a Dual-layer stretch base jacket. This Anatomical 3D design and construction prevents the pads from moving around too much, ensuring a close-to-the-body fit! The Tacks 9080 Shoulder Pads also utilize an adjustable strapping system allowing players to customize how the pad feels on their body! Moving to the shoulders of the Tacks 9080 Shoulder Pads, the caps are constructed with a protective and lightweight JDP Foam that provides players with elite-level protection. This goes hand in hand with CCM’s popular D30 Smart material that helps reduce the force of direct impacts from checks! Just below the shoulder caps are the bicep protection pieces with adjustable strapping, giving the players the option to choose how the pads fit around their biceps. Molded-PE Floating foam was used in the sternum and spine areas, further enhancing the protection levels of the Tacks 9080 Shoulder Pads. The D30 Smart material was utilized in these areas again as well, helping to disperse the force of direct impacts in game! Moving to the mid-section, HD foam kidney protection and a removeable belly pad were added! This kidney coverage provides players with even more comfort, and protection to the sensitive kidney areas, ensuring all parts of your upper body are well-covered and protected. On the interior of the Tacks 9080 Shoulder Pads, CCM added a comfort base jacket and mesh liner. This design is made to maximize air flow and mobility keeping the player dry, cool, and keep the pads feeling lightweight throughout the entire skating session! Thanks to the improvised D30 Protection and the addition of the Dual-Layer base jacket, these shoulder pads were built to perform at the highest levels! If you are an elite-level player looking for great protection and comfort in your gear, look no further than the CCM Tacks 9080 Senior Shoulder Pads! Les mer

Combo Ergonomic shape Protective cup included Independent garter suspension system Color: Black / red Fabric Content: 100% Polyester Les mer

Combo Ergonomic shape Protective cup included Independent garter suspension system Color: Black / red Fabric Content: 100% Polyester Les mer

Designed to provide the ultimate in comfort and fit, the Tacks 310 helmets from CCM provide a geometry that helps absorb impacts and a pro-preferred look. Similar to the late Resistance line, the Tacks helmets offer a single tool free adjustment at the back of the head allowing a customized snug fit. This single adjustment system changes the width and length of the helmet as well as securing the occipital lobe of your head. On the inside of the shell, CCM D3O Lite foam pods. These pods of rate sensitive foam dampen impacts across all energy levels to better protect your head. As well, to finish the helmet, an I.Q.Shion comfort liner offers a premium level of comfort with a softer foam. Les mer

Sleeker, pro inspired design modeled off the HH4500 helmet, passes the mirror test and has modern appeal. Offers the flexibility to adjust to various head shapes for a personalized and proper fit. Helmet VERTEX foam protection, enhanced impact management with significant weight reduction SUSPEND-TECH liner system w/ PORON® XRDT, true free-floating suspension liner offers enhanced protection and maximum comfort Triple-density impact management protection Dual density ear cover protection, increased ear protection with clear protective film to eliminate abrasion Occipital lock 3.0, adjustment feature to help stabilize and lock the back of the head into place for proper fit Central tool-free adjustment, quick and easy size adjustment feature centrally located on top of the helmet, creating a narrower and sleeker look, with enhanced side impact protection Ventilation ports, strategically placed for improved airflow Memory foam temple pads, contour to the different head shapes for a snug, personalized fit and provides maximum comfort MICROBAN® antibacterial protection to resist odors and mildew Angled ear loops, provide the accurate angle to help secure the chin strap into position for proper fit CSA, HECC, CE certified Face Mask Titanium construction for lightweight play, 50% lighter than competitive facemasks Premium design has enhanced visual areas with patented oval wire Free floating, triple density chin cup w/PORON® XRDT treated with MICROBAN® antibacterial protection to resist odors and mildew CSA, HECC, CE certified Color: Titanium Smoke Les mer

The Bauer Supreme 2S Pro hockey stick is built for efficiency and power, with the innovation and professional features that elite-level players are looking for in a high kick point model. DuraFlex resin system for increased shaft strength Advanced Carbon Layering for reduced weight without sacrificing durability Renewcore technology for a longer lasting blade Monocomp one-piece construction for enhanced shaft consistency Maximum Power Kick for increased energy transfer New to Bauer’s top-end Supreme hockey stick this year is the Duraflex resin system. While Bauer continues to use its TeXtreme carbon fiber construction in the 2S Pro, the new Duraflex resin increases the entire shaft’s durability and flexural strength. The stick also utilizes the popular Monocomp technology, a carry-over from the Supreme 1S, which provides a true one-piece stick design, producing excellent consistency throughout the shaft. These elite technologies allow you to lean heavier into shots for maximum power. The 2S Pro blade features a key upgrade, Advanced Carbon Layering, which improves the durability-to-weight ratio. The ACL technology produces more carbon fiber layered in a compressed area, increasing the strength of the blade while reducing the stick’s weight. Bauer combines blade innovation with trusted features from the previous model, bringing back their Renewcore technology, which takes a pressurized gel and fills internal blade cracks to create a longer lasting structure. These key features produce a reactive blade for higher shot velocity, without sacrificing strength and durability. The Maximum Power Kick is another carry-over from last year’s 1S model. This technology maximizes the transfer of energy on every shot, with a taper geometry that thickens the hosel area to create a higher kick point, allowing you to generate power from handle to blade. The MPK technology is complemented by the extended transfer zone, allowing you to load your snap shots based on hand positioning for added versatility. Whether you’re firing off a quick snap shot or loading up for a slap shot, the fast recoil and increased energy transfer will provide you with excellent power. The Senior model of the 2S Pro weighs 415 grams, a 5-gram reduction from last year’s 1S model, and features the new P92M blade profile, Bauer’s maximum blade height. With NHL players requesting a taller blade, Bauer delivered, providing the same curve and lie as the standard P92, with the addition of the increased height. This feature helps you in all areas of the game, whether you’re winning a face-off, tipping shots in front of the net, deflecting passes from the opposing team, or collecting bouncing pucks in the corners. Bauer has created its most efficient hockey stick to date in the Supreme 2S Pro, using a winning technological formula to produce a stick made to give you a powerful release. If you’re an elite player looking to take your shot to the next level, the 2S Pro has the features you want. Les mer

Th' Bauer Nexus 1N pant are designed with a fit every hockey purist will love. The classic construction offers a wide, volume fit that allows for ultimate coverage and unmatched mobility. The 1N replaces the beloved Nexus 1000 pant and offers updated foam protection and an adjustable extension fit system for growing or taller players. To protect, Bauer uses a molded dome hip guard and molded HD foam kidney pads to keep you safe from impacts. The spine protection is made up of Seven+ Technology foam to better disperse impacts taken. The Seven+ Technology is also designed to withstand repeated impacts and hold its natural shape over time. The thigh padding offers a 2-piece ergonomic pad to wrap around the leg and protect at all angles. On the inside, a 37.5 technology liners works as you sweat to keep you dry and reduce odors. The exterior of the pant is made up of nylon with 840 denier abrasion resistant overlays on the hips and thighs as well as other high stress areas for better last and durability. Stretchable leg gussets and leg zippers allow you to easily put on your pants before or after your skates and flex panels in key areas aid in mobility. The pants fasten with a skate lace and buckle closure. In addition, the 1N pants offer an extension fit, allowing the pant to drop 1" for those growing players. The shell is also removable for easy post-purchase logo-ing or striping. Les mer

Spine: Free Flex spine protection with AEROLITE technology Hip: Molded dome construction Thigh: 2-piece ergonomic pad Outer Shell: Pro level abrasion-resistant 840 denier nylon overlay (Thigh) Fit/Mobility: Adjustability: Extension fit (+1" in length) Kidney: Molded segmented construction Belt: MD foam Flex Panels: Stretchable fabrics Leg Gussets: Stretchable leg gussets with pleated zippers Front Panel: Skate lace closure system Liner: 37.5® Technology Add Ons: Suspender buttons Customization: Outer Shell: Removable outer shell for logo and stripe post embellishment Les mer