Søkeresultater for 'CCM Hockey Full zip hood SWE Sr Tre Kronor Full zip hood SWE Sr'

The CCM Ribcor 49K was designed for elite players looking for performance at a fraction of the cost. Ribcor has always been about generating efficient loading to achieve a quick releasing shot in a low-kick package and the 49K does just that with PopMatrix Technology while still providing excellent control and accuracy from the Ascent Blade. The 49K features PopMatrix technology, a nice carry over technology seen in the Ribcor Trigger as well as last year’s Reckoner. PopMatrix is a unique visual technology that consists of carbon fibers which are permanently in tension due to the unique concave geometry through the taper of the shaft. The idea of this is to get easy loading, more efficient energy transfer and a faster snap back as quickly as possible. CCM has been able to come up with quantifiable measurements to show that the 49K has the highest release rate from a CCM stick at its price point. The performance fibers that are found in the rib are also protected by an outer layer composed of protective fibers to put durability issues to rest. This all translates into less effort required to load the fibers of the shaft, which results in a load, release, and feel unlike any other on the market. As far a construction goes, the 49K is composed with a fuse construction made with a high quality carbon fiber throughout the entirety of the stick. The orientation of the fibers creates the 3:1 High Power Taper Ratio, which means that it has a stiffer top and bottom in relation to the front and back of the shaft. This results in less twisting on shots and more direct power transfer. Moving down to the blade, the 49K comes equipped with Ascent Blade. As CCM’s dangler stick, they really wanted to promote that great feel any puck handler would desire, so to achieve this the Ascent Blade is composed of a premium foam that provides an incredibly soft feel. And although it’s meant to provide great feel, the fact that the blade increases in stiffness from heel to toe provides hard, accurate and quick releasing shots off the toe. The new Ribcor 49K stays true to the DNA of the Ribcor line while, once again, improving its feel and performance. Check out the 49K today for MAXIMUM POP. Les mer

The Ribcor line has always been unique due to its visual technology that helps generate amazing loading and quick release. The Ribcor Trigger ASY is highly responsive. Built with an ASY-1 flex profile, this new stick is designed to help optimize the performance of every single fiber in the stick for maximum pop. The new Ribcor Trigger ASY will still feature the visible Pop Matrix Technology. The ASY-1 Flex Profile was developed to maximize the performance of every single fiber in the stick. This allows the stick to release even quicker than before. The structure of the blade has also been modified to increase puck feel and reduce weight. The new Ribcor Trigger ASY stays true to the DNA of the Ribcor line while, once again, improving its feel and performance. FLEX PROFILE The Ribcor Trigger ASY has an even quicker release. Designed with feedback from NHL players and validated in the CCM Performance Lab, the new Flex Profile will help you achieve maximum pop on every shot. CONSTRUCTION The Ribcor Trigger's Pop Matrix Technology construction feature performance fibers that are constantly in tension for a quick and efficient power transfer and loading while being protected by the outer layers. BLADE The Ascent Blade 2 is a lighter blade that has been developed to improve puck feel while maintaining toe stiffness. SHAFT The shaft includes a technora reinforcement, which increases the durability without compromising performance. KICK POINT True to Ribcor form, the Trigger ASY features a low kick point for easy to load shots with a surprisingly quick release. Les mer

Easton’s back with the Stealth series of sticks we’ve all been waiting for! One that’s sure to live up to the name’s legendary heritage. The Easton Stealth CXST is true to the Stealth name by using the original Stealth construction process, seamlessly marrying the shaft and blade. The CXST also features Easton’s exclusive Elliptical Profile – a unique low taper profile that helps control the shaft and blade from twisting and provide pinpoint accuracy, all while providing a deceptively quick shot release. Additionally, the Elliptical Profile gives the CXST that unique feel shared only by other legendary Stealth models such as the S17, S19, and RS. Easton went to great lengths to address the one area where previous Stealth models may have lacked – durability. The CXST features Easton’s EC80 Carbon Fiber which is then coated with a new, proprietary XTX (Extra Tough Resin Matrix). A reinforced epoxy material that boasts high impact strength and stretch properties, XTX provides extra strength and durability while allowing for great shaft responsiveness and performance – the perfect combination of power, toughness, and feel. Blade stiffness and durability have been elevated to a new level thanks to Easton’s new EXO-RIM. Internal stiffeners have been used in blades for years, what Easton has done is taken that same material and enclosed the entire toe of the blade. The result is added strength and stability to “power through” the puck for improved velocity and accuracy. When you combine Easton EXO-RIM technology with their HYPERTOE construction, a stiffened toe region resulting in more responsive shots off the toe of the blade, you have one of the most technologically advanced, power packed blades on the market. Our favorite part though, the Exo-Rim™ protects the inner core helping to prevent blade chipping and splitting. The blade of the CXST is then wrapped in Easton’s EC80 Carbon Fiber Matrix with a matte finish. Les mer

The year 2000 saw the introduction of the first synergy stick and ever since they have been renown for responsiveness and powerful shots. An NHL goalie even once called for them to be banned Now in its 10th generation, comes the Synergy GX, with greater puck velocity and boasting its lightest weight ever. How? ShotBoost technology. Shot Boost: Additional springs in the corners of the shaft generate more blade speed and provide additional strength Power Taper: Newly Engineered taper geometry allows players to transfer more power into the blade on every shot Hypertuned2: Tailors the flex of each blade to the shaft flex to create a more responsive blade for every player Hyperlite Design: Removes excess material in the taper for zero overlap to create a blade-light balance Exo RimTM: Adds velocity through stability, powers the blade through the puck for improved velocity and accuracy Hypertoe: Creates a stiffened toe region for more responsive shots off the toe of the blade XTX Resin: A reinforced matrix with impact strength and stretch properties for shaft responsiveness and performance One-Piece Stick: Seamlessly molds the shaft and blade for a true one-piece design Les mer

Think you know Reactor sticks? Think again. For 2015, the entire Reactor line of sticks has been revamped to offer goalies with even more options while choosing their companion of choice. The composite construction of the previous Reactor line has been replaced with a more traditional and reliable foam core construction that goalies of all skill levels will love. Goalies may recognize the 7000 stick as the same construction as the Bauer 7500 that was ever so popular at the professional and collegiate level. For years, professional players had been requesting the 7500 stick, preferring its good balance and exceptional durability over pricier composites. The Reactor 7000 is a continuation of this construction, bringing the success of the 7500 to a new label and graphics. The paddle of the stick is a traditional high-impact polyurethane, complemented nicely by an aspen core shaft with carbon strips running the length for reinforcement. The blade of the stick is a traditional polyurethane foam core, with added reinforced shooter strip on the front for added blade stiffness and more reliable puck deflections. Liked the 7500? We know you’ll love the Reactor 7000. Note that the New Reactor line of sticks has changed its paddle measurement system. A Reactor 9000 paddle length of 25” will equate to a Supreme paddle measurement of 26.5”. Les mer

Think you know Reactor sticks? Think again. For 2015, the entire Reactor line of sticks has been revamped to offer goalies with even more options while choosing their companion of choice. The composite construction of the previous Reactor line has been replaced with a more traditional and reliable foam core construction that goalies of all skill levels will love. Goalies may recognize the 7000 stick as the same construction as the Bauer 7500 that was ever so popular at the professional and collegiate level. For years, professional players had been requesting the 7500 stick, preferring its good balance and exceptional durability over pricier composites. The Reactor 7000 is a continuation of this construction, bringing the success of the 7500 to a new label and graphics. The paddle of the stick is a traditional high-impact polyurethane, complemented nicely by an aspen core shaft with carbon strips running the length for reinforcement. The blade of the stick is a traditional polyurethane foam core, with added reinforced shooter strip on the front for added blade stiffness and more reliable puck deflections. Liked the 7500? We know you’ll love the Reactor 7000. Note that the New Reactor line of sticks has changed its paddle measurement system. A Reactor 9000 paddle length of 25” will equate to a Supreme paddle measurement of 26.5”. Les mer

The legendary CCM name continues its dominance with the introduction of the new 860 goal stick! The CCM 860 is designed to meet the needs of nearly any level of player as it combines a well-balanced feel with exceptional durability at a great value. The 860 goal stick begins with a polyurethane foam core, provides exceptional feel and control and minimizes stick vibrations upon impact. The paddle is reinforced with fiberglass laminates, improving durability against hard shots while remaining sturdy over extended use. The blade is constructed of the same continuous urethane foam core as the paddle and is reinforced with fiberglass for strength and feel. The urethane foam core is complimented by a multi-laminate shaft with fiberglass, resulting in high durability. For the goalie looking for a foam core stick with great value and durability, the CCM 860 goal stick is an excellent choice. Les mer

CCM 860 Intermediate Goalie Stick Les mer

Blade - Polyuerethane foam injected blade with fiberglass reinforcements for strength and feel. Paddle - Foam core with fiberglass which reduces vibration from impact. Handle - Multi-laminate handle for high durability. Les mer

CCM Tacks 4092 Goalie Skates are perfect fit for those goalies looking for strong and stiff boot. These skates have a perfectly developed protection system which has improved toe and blade areas. Not only that, but also a comfortable footbed and 7mm tongue with lace bite protection. Plus the Prolite G stainless steel blades which are famous for their long lasting performance! Les mer

The Vapor family of skates continues to be the most popular family within Bauer's 3-fit platform. Although still considered a Vapor skate, the X200 goes a little outside of the typical “Vapor” fit. Instead of the standard V-fit profile (standard width through toebox, narrower fit in the heel and ankle) we are used to seeing on the Vapor line, the 200 is less snug and closer to a classic style fit. Unlike its other Vapor counterparts, the X200 features only a sublimated premium nylon quarter package and will not have the OD1N concept skate-inspired thermoformed X-rib pattern. And although you cannot heat mold this skate to your foot, the quarter package will still provide adequate support during tight turns and quick cross overs. Looking inside the boot, the X200 uses a microfiber liner, which provides ultimate comfort throughout your time on the ice. While the tongue is a 1-piece felt design, composed of a 30z white felt. The boot sits atop an injected TPR outsole, which is a commonly used material for which to mount the Tuuk Lightspeed Pro holder which houses the non-removable Tuuk Stainless Steel runner. Les mer

The Nexus N6000 skates feature a quarter package comprised of a lightweight mesh. This is the perfect entry level skate for players looking for a deep classic fit at a fraction of the cost. The classic fit profile features a traditional “Deep-V” heel shape, combined with an anatomically molded upper. The result is a boot that provides a comfortable, secure heel lock, while allowing for better wrap along the top of the foot. These fit characteristics amount to a boot that is comfortable right out of the box, and is very accommodating to players with higher volume feet. The felt tongue features a metatarsal guard that helps provide comfort and protection on the ice. The N6000 will also feature a brushed nylon liner on the inside of the boot to keep the skate feeling comfortable. Add Bauer’s Molded EVA footbed and you have a complete package of comfort and performance. The boot sits atop Bauer’s TUUK Lightspeed pro holder and is accompanied by non-replaceable TUUK stainless steel runners. For a wider and higher volume skate at a great price, check out the Bauer Nexus N6000 skates. *Description and images listed may differ from the actual youth model received. Les mer

The Bauer RE-AKT 75 Hockey Helmet combines the best protecting and most comfortable features of two successful helmets, the IMS 7.0 and the 7500, and combines them into one. One of Bauer's most premier foams, XRD, covers the temple areas for maximum protection on such a vital part of the brain. The back of the helmet features re-engineered Seven+ Technology, that does an unparalleled job of managing high-energy impacts that most commonly occur at the back. The rest of the suspended liner is constructed of multiple densities of foams. The top layer of this foam that rests on the head offers a traditional and soft feel, while the under layers provide the bulk of the protection. The suspended aspect of this helps to better manage rotational impacts unlike the foams, which handle most of the linear impacts. The shell is tailored after the top of the line RE-AKT 100, which includes colored air vent options. The RE-AKT 75 helmet comes with a tool-less adjustment system that enables players to securely adjust their helmet on the fly if need be. Les mer

The Bauer Nexus N9000 Hockey Elbow Pads feature an asymmetrical elbow cap shape to fit the natural shape of each arm. The injected PE elbow cap also provides solid coverage to both the elbow cap and forearm as well. Extending out of the forearm, Bauer uses a molded high density foam guard reinforced with a plastic insert for high-level slash protection across the top of the forearm. The Bauer N9000 elbow pads utilize a 2-piece design with a floating bicep guard that connects by a single elastic strap at the top of the elbow cap, providing a very flexible and mobile fit. That bicep guard has a wide medium-density foam construction with a molded plastic base for solid, wrapping protection, including an extensive dome cap to cover the side of the elbow joint. Bauer also added an extra protective pad across the elastic bicep strap for even greater coverage. The interior features a Thermo-Max liner with superior comfort and moisture wicking technology. The Nexus N9000 elbows also feature an elbow donut to lock the pad in place and provide a secure, protective fit. Les mer

Bauer Nexus N7000 Senior Elbow Pads Les mer

The Bauer Vapor X800 Elbow Pads give players a great flexible fit with solid, mid-level protection. Bauer uses Free Flex construction that allows the bicep guard, elbow cap, and forearm guard to move flexibly and partially free from each other. The X800 elbow pads use an injected PE (plastic) elbow cap topped with medium density foams that add an extra layer of protection for you and other players on the ice. The flexible medium density foam used in the bicep and forearm guards are reinforced by internal PE (plastic inserts) that are both flexible and protective. This all locks in with a 3-strap design and an internal donut to secure the elbow in place so the pad will provide the optimal protection. Les mer

The Vapor 1X Elbow pads from Bauer offer incredibly lightweight protection for the Elite player of all ages. Built from a base of the APX2, the 1X adds curv composite in key impact areas and features molded pieces to better fit to the player. Keeping true to the Vapor line, the APX2 offers a tapered, snug fit for ultimate mobility. The two-piece design uses Bauer’s Free Flex cap technology to allow for a natural feel and increased range of motion. The Injected cap covered with MD foam lets the elbow sit properly in the sling while the 3-strap system featuring a lock strap and elastic strap hold the arm in place and decrease unwanted movement. The bicep guard features AEROLITE technology with a molded component to sit in a more natural position against the upper arm and keep protection at a maximum. On the other side of the pad, along the forearm guard, Curv composite, HD inserts and AEROLITE technology offer maximum protection at the highest impact area. The 1X is complete with Bauer’s transfer mesh at the interior elbow joint and a 37.5 technology liner to further reduce weight and better maintain odor and moisture control. Les mer

Built for speed and agility, the VAPOR X800 shoulder pads have a tapered fit for increased mobility. Constructed with mid-density foam in the sternum, injected shoulder caps and mid-density foam inserts throughout the front panel, spine and kidneys, players can maneuver with confidence. VAPOR SHOULDER PAD FIT This tapered fitting shoulder pad narrows toward the abdomen, providing the protection players need without sacrificing quickness or mobility. Overall Fit Tapered Dynamic Components 1-piece bicep guard and arch support Base Body Multi-segmented design Liner Hydrophobic mesh Shoulder Cap Injected cap with MD foam insert Sternum MD foam + PE insert Spinal MD foam + PE insert Front Side Panels MD foam inserts Back Kidney Panels MD foam inserts Bicep Guard Molded thermoformed component Arch MD foam + PE insert Belly Pad Removable MD foam Les mer

The quickest players need pants that enhance their stride. And that’s what they’ll find in the forward-leaning, ergonomic fitted VAPOR X700 pants. Designed for quickness, this tapered pant takes stance, fit and stride characteristics into consideration, helping players be their most mobile on the ice. Kidney Molded ergonomic kidney Belt Exposed outer belt Leg Gussets Nylon gussets Front Panel Skate lace closure system Liner Hydrophobic mesh Add Ons Suspender buttons Les mer