Søkeresultater for 'Tre kronor'

The CCM Ribcor Trigger ASY is the top of the line model of the new Ribcor stick line for 2016. Ribcor has always been about generating efficient loading to achieve a quick releasing shot in a low-kick package. With familiar technologies in Pop Matrix and Technora, CCM changed it up and added new features to optimize performance throughout the entire stick. No doubt the biggest change coming in this stick is going to be the new ASY-1 flex profile. This is not to be confused with the flex point, which thanks to PopMatrix technology is a low kick point. The Trigger features a completely new layup that was developed to maximize the performance of every single fiber in the stick by strategically layering and angling the fibers in certain areas of the stick. This allows for an even quicker release all designed and tested from NHL player feedback and the CCM performance lab. This new layup also accentuates the PopMatrix technology giving shooter’s the ability to get their shots off as quickly as possible. The Trigger features PopMatrix technology which was last seen in the Reckoner. PopMatrix is a unique visual technology that consists of carbon fibers which are permanently in tension due to the unique concave geometry through the taper of the shaft. The idea of this is to get easy loading, more efficient energy transfer and a faster snap back as quickly as possible. CCM has been able to come up with quantifiable measurements to show that the Trigger has the highest release rate from a CCM stick to date. The performance fibers that are found in the rib are also protected by an outer layer composed of protective fibers to put durability issues to rest. This all translates into less effort required to load the fibers of the shaft, which results in a load, release, and feel unlike any other on the market. As the Ribcor line has become linked to Technora Technology, it’s to no surprise that the CCM Trigger will be featuring the Aramid Fiber reinforcements running through the lower third of the stick. Technora is a patented, synthetic fiber similar to Kevlar that boasts a high tensile strength and better bending properties, which is why it has been trusted and used in the automotive and aerospace industries for years. The same material used in parachutes, body armor, and jet engines now reinforces an area of high wear and tear, the slash zone. This is beneficial in helping to take this stick to high levels of durability and ensuring the longevity of the pop life game in and game out for an overall better performing stick. Moving down to the blade, the Trigger comes equipped with the new Ascent 2 blade. The Ascent 2 is rooted from its predecessor the Ascent, found in the Reckoner, but comes with a few changes in this Trigger model. As CCM’s dangler stick, they really wanted to promote that great feel any puck handler would desire, so to achieve this CCM raised the one internal support bridge a bit higher to allow the puck to make more contact with the premium foam in the blade. While the feel of this blade will be softer to provide those soft hands, the toe is still stiff to provide accurate and quick releasing shots off the toe. Simply put Ascent 2 is lighter, provides more feel, accurate and full of pop. The new Ribcor Trigger ASY-1 stays true to the DNA of the Ribcor line while, once again, improving its feel and performance. Check out the Trigger today for MAXIMUM POP. Les mer

In what has become a much anticipated summer tradition in recent years, CCM will be releasing the newest update to their RBZ composite hockey stick line in August. The original RBZ was a great stick that was hugely popular and in conjunction with TaylorMade, CCM has been able to improve on it every year. Theyve continued to make a great stick better and better. The newest version of the stick is called the RBZ SpeedBurner. The RBZ SpeedBurner is the stick designed for pure shooters, looking for the hardest, most powerful shot possible. By comparison, the other sticks from CCM the Ultra Tacks, designed for places seeking the most accurate shots and the Ribcor, for great stick handlers who want to be able to load the stick easily and a really quick release. Power Hosel Technology The biggest upgrade made to the RBZ SpeedBurner is the introduction of CCMs new Power Hosel Technology. With past RBZ models, CCM has been forced to use a more traditional method of fusing the stick together by extending the blade up, into the shaft. Although this was the best technique at their disposal, they did not feel it was an ideal complement to their SpeedBlade Technology. So as theyve don before, they looked to their counterparts at TaylorMade. They saw that with their golf drivers, TaylorMade assembled the clubs by inserting the shaft into the hosel of the club head. CCM took this idea and set out to translate it to the RBZ stick line. They redesigned the lower portion of the RBZ shaft, adding an internal rib and building it to be inserted into the blade. The addition of the internal rib and the new fusion method had direct impacts on the sticks performance, as well as some indirect effects. By inserting the shaft into the blade hosel, the energy transfer of the stick becomes much more efficient. This means that when you flex the shaft while shooting, energy travels through the stick and to the puck quicker with less energy lost. The result is a more powerful shot with a faster release in comparison to previous RBZ models. While the new internal rib also helps to support the efficiency improvements, it more importantly improves the structure and durability of the taper. The rib helps to enhance the rigidity of the lower portion of the stick, leading to more stability on big slapshots. More stability means less blade twisting and torqueing, keeping the blade more square to your target for more accurate shots. Aside from those performance features, the internal rib also helps to improve the impact strength of the lower shaft. That lower shaft area is often the target of impacts, whether it is slashed or lifted by another stick, hitting the post trying to bang home a rebound or giving some pesky little forward a good whack to the shin pads out in front of the net. Improving the impact strength doesnt mean the stick is unbreakable, but it makes it a bit tougher and helps the stick to continue performing like it did the day you got it for a longer period, even after its been slashed a few times. Weight Reduction Even though they added some material with the rib and extended shaft from the new Power Hosel, CCM was still able to reduce the overall weight of the SpeedBurner by 5 grams compared to last years SuperFast. I know what youre thinking, 5 grams So what? It might not seem like much, but look at it this way the lightest 30 (yes, THIRTY) sticks in the game right now are separated by a total of 40 grams. On top of that, the 4th lightest and 30th lightest sticks are only 22 grams different in weight. Long story short When talking about top end hockey sticks, 5 grams is a significant weight reduction. RBZ Flex Profile & Blade Technology There are two big that the RBZ line has come to be known for, the flex profile and the unique blade construction. Although CCM has consistently updated and improved those two features, theyve been able to do so without alienating the players who love the stick by changing the feel and performance that won them over. Custom Kick Point The SpeedBurner is designed for players seeking the hardest shot possible and will still feature CCMs Custom Kick Point or Constant Stiffness Profile. This means the stick is going to flex from wherever your lower hand is. This gives you great performance on all types of shots and its what makes the RBZ line such a popular all-around shooting stick. The SpeedBurner maximizes the energy loaded into big slap shots and optimize the amount of energy loaded into quicker snap and wrist shots, giving you the most possible power on both types of shots. Since the stick reacts to the placement of the bottom hand during a shot, it will feel easier to load, giving the feeling of more power coming out than you put in. Since the stick is equally stiff through the entire shaft, it has an extremely smooth load and release when shooting. Speed Pocket Blade Technology The RBZs unique blade construction has always been a stable of the line. The goal as always has been to maximize the blades Coefficient of Restitution (C.O.R) or trampoline effect, to make the puck jump off the blade on shots. Unlike other blades on the market, which are filled with various types of foam, the RBZ line is hollow; creating what CCM calls the Speed Pocket. Like past RBZs, the SpeedBurner blade takes many cues from golf drivers in the way it is designed, tested and how it performs. With SpeedBurner, CCM wanted to maximize C.O.R., and increase the size of the sweet spot of the blade. A bigger sweet spot allows for the same feeling of the puck jumping off that hot blade face, even when you dont contact the puck exactly where you want to on the blade. Due to the introduction of the Power Hosel and the new way the stick is assembled, CCM was able to reexamine, rework and optimize the Speed Pocket blade to realize these goals. Some other great RBZ SpeedBurner features The new RBZ SpeedBurner will have a few features continuing forward from past models that have been slightly tweaked, as well as some continuing forward as they were. Since its introduction, the RBZ line has always had a focus on optimizing the swing weight of the stick and SpeedBurner has the lowest swing weight for the RBZ lines to date. Swing weight is predicated on the distribution of the weight throughout the stick. The swing weight of a stick basically does two main things; it influences how light or balanced the stick feels and helps shooters to maximize the speed of their swing on slapshots. The lowered swing weight of the RBZ SpeedBurner will help shooters to gain more speed on their downswing and generate more power on shots. Like the past RBZ sticks, the SpeedBurner will feature CCMs T-Geometry shaft. T-Geometry is a squared shaft allowing for better control when shooting. The square corners help to prevent the shaft from spinning in your hands when shooting, helping to increase accuracy. Les mer

The CCM RBZ Revolution stick delivers on the next step in the evolution of shooting performance. It's the first stick to feature CCM's new Faceplate Technology which increases Coefficient of Restitution (C.O.R.) on the delivery of your shot. The Power Alloy work sthe same way as the faceplate on a TaylorMade driver - it enhances strength and stability for a responsive face that maximizes power. Finally, the addition of Technora fibers to the weave of shaft helps take durability to new heights. Les mer

The revolutionary RIBCOR is back with upgrades and reinforcements making it the best Ribcor stick yet! By utilizing the most cutting edge technologies and materials available, the new CCM Ribcor 40K (powered by Reebok) brings us a stick with superior durability and unbelievable pop! The RIBCOR series, now proudly boasting the CCM name, is all about having a stick that is easier to load and more efficient at generating power for your shot. The quick release of the stick comes from the low-mid kick point, while still providing excellent control and accuracy from the stiffness of CCM’s new SXX2 blade. Predominantly subdued black and grays with neon green accents give the new Ribcor 40K just the right amount of visual flash. CCM uses high modulus carbon fiber for this stick. The orientation of these fibers creates the High Power Taper Ratio, which means that it has a stiffer top and bottom in relation to the front and back of the shaft, resulting in less twisting on shots and more direct power transfer. The senior shaft uses a Traditional geometry with square-corners, while the intermediate and junior uses a more contoured geometry with rounded corners for a better fit in smaller hands. CCM’s Ribcor technology consists of carbon fibers which are permanently in tension due to the unique (and visible) RIB geometry through the taper of the shaft. This means that less effort is required to load the fibers of the shaft because they are already part way there. The preloaded Fibers result in a load, release, and feel unlike any other on the market. Simply put, this stick wants to shoot! It’s no wonder the Ribcor is the preferred weapon of choice by NHL pros such as Matt Duchene and John Tavares. Perhaps the biggest addition to this year’s Ribcor offering is the Technora Aramid Fiber reinforced shaft. Technora is a patented, synthetic fiber that has been trusted and used in the automotive and aerospace industries for years. The same material used in parachutes, body armor, and jet engines now reinforces the shaft of the new CCM Ribcor 40K, resulting in a new level of durability and ensuring the pop of the new 40K lasts game in and game out! The SXX2 blade is designed to go from stiff in the heel to extra stiff at the toe. Internal reinforcements run along the length of the blade acting as bridges to provide a stiff feel throughout that gain even more rigidity at the toe. CCM has gone a step further by angling these reinforcements upward at the toe for an even stiffer toe than before, which helps keep the blade square to the target. The blade also features what Reebok likes to refer to as their Tri Matrix construction. This is also where the orientation of the fibers comes in to play. The 45° orientation stores and releases energy, while the 0° and 90° orientation adds strength and stability - blade technology that's designed to enhance performance and accuracy of your powerful shot. Les mer

CCM has taken huge strides to take an already successful product from Reebok and revamp it for 2014! You might be thinking that this stick looks familiar. Previously known as the Reebok RIBCOR, CCM has taken this product and added some key upgrades to a stick that was already top notch. You'll remember that the original RIBCOR displayed the all-new, revolutionary RIBCOR shaft design which features carbon fibers that are permanently in tension. This construction helps to maximize the energy transfer from your hands, through the shaft, and to the puck. Also, returning for the newest RIBCOR stick, is CCM's Tri Matrix fiber construction. This technology is engineered to feature one layer of 90 degree fibers between two layers of 45 degree fibers. These layers are meant to work together, in the sense that the 90 degree layer is ideal for maintaining strength and durability, while the surrounding 45 degree layers are designed to store and release all the energy when you load up your shots! There have been a couple upgrades to the CCM RIBCOR 40K, as there is with any new release stick. First off, the blade construction has been upgraded. This year, the RIBCOR will feature CCM's SSX2 Blade which is the second coming of last year's SSX blade. The blade is built with a stiff heel, and gets even stiffer as you make your way to the toe, which is extra stiff at the end. The blade is designed like this to ensure that it maintains its shape through any and all shots. This means that wherever you launch your shot from, the torsional flex will be limited, ensuring that your blade is facing your target throughout the shot, and keeping your accuracy on point. Also updated, was the way that CCM wil reinforce this stick. We all know the advantages of the RIBCOR design and its tightly wound fibers. They store energy and keep the stick durable. But this year, the CCM RIBCOR 40K will feature CCM's TECHNORA reinforcement. TECHNORA is an aramid fiber that is commonly found in products demanding high durability and performance, such as automobile bodies and wind surfing sails. What this means for your stick is great durability and improved long-term performance! Order one today and discover why CCM chose to throw down all of their latest technologies into the brand new CCM RIBCOR 40K! - See more at: https://www.purehockey.com/ccm-ribcor-40k-senior-composite-stick#product_tabs_description_tabbed Les mer

The RIBCOR series of sticks puts carbon fibers in tension for an explosive release every time you unload. The RIBCOR 28K, which weighs in at 515 grams (senior), features easy-to-load technology that provides you with a professional stiffness profile that mirrors the top-of-the-line RIBCOR shaft. The 3:1 power taper provides you with more vertical stiffness, which allows for less energy wasted down through the ice. Basically, every ounce of strength you put into your shot will go into the loading of the stick. The SXX Blade is stiff in the heel to extra stiff in the toe, helping to keep the blade square to the target. This helps you have an improved puck feel and keeps the blade honest on every shot. The tacky texture of the grip material gives you a better feel hand-to-stick, providing you with the comfort to go for the stretch poke checks or make some moves with the puck you may not have tried before. Les mer

Bauer X800 is a stick in the next generation of Bauer’s Vapor line made ideal for crafty players. Continuing the focus on puck handling and quick release shots, the X800 is revamped with improved QRT technology which features an aggressive taper that gives this stick a low kick profile and has also been completely optimized with a new layup design. The result ends with an X800 hockey stick that has been made lighter, faster, and stronger than its predecessor Bauer’s research showed that reorienting the layers of carbon fiber would pay huge dividends in the progression of not only QRT tech but also the entire Vapor line as a whole. By doing this, the stick was made lighter by trimming off a little bit of weight, made faster by giving the shooter the ability to achieve maximum levels of deformation or easier stick loading, and made 30% more durable in the taper area. With all these improvements working together this X800 provides a quicker overall release! To make up the shaft construction, a combination of visible premium lightweight 3k woven carbon fiber as well as fiberglass in the shaft of the Vapor X800, making the stick feel comparable to offerings twice its price. The X800 also uses a traditional, proven, fused construction. The Micro Feel II shaft profile has rounded corners and double-concave walls which allow the shaft to fit comfortably into your hands, resulting in easier puck handling and superior control The blade of the X800 features Bauer’s AERO FOAM 3, a lightweight dual density foam that helps to dampen vibration and improve the durability of the blade. This is wrapped in a special BiMax 3K weave which has a higher tensile strength than a conventional 3K weave. Additionally, this entire Vapor line includes Bauer's Pure Shot Blade Profile which is that visible expanded throat design that reduces the amount of blade deflection or the twisting / opening of the blade while shooting. The outcome of all this is a blade that is balanced and durable yet offers excellent feel and playability Les mer

The TotalOne MX3 Stick is Bauer's latest top-end model for the Supreme stick lineup. New for this year is the Power Sense 2 Blade Core. Bauer was able to improve the original version by fusing the blade core to Bauer's TeXtreme Carbon. This integration of the outer and inner blade eliminates excess glues and materials, significantly reducing the weight. This new blade is designed to be softer for better touch on shots and passes. The softer blade also allows the puck to be cradled longer on powerful snapshots, ensuring maximum energy is transferred from stick to puck. Bauer continues to utilize AEROFOAM 3 in the heel of the blade, providing stability and strength to the core while improving balance. The MX3 Stick uses the well-known amplified mid-kick point flex profile that helps load maximum power on slap shots and one-timers. Also returning from previous models is the Monocomp technology, Bauer's one-piece stick molding process that creates more consistency and better overall balance. Another of Bauer's great technologies is eLASTech, a specially designed resin in the stick, designed to improve the overall durability of the stick and keep the stick performing like new for much longer. Les mer

The Bauer Supreme 180 stick was designed and developed for the player seeking visible technologies, pro level feel and playability at a performance level price. The Supreme line features a mid-kick flex profile, which means that it is easier to load through the middle due to its softer properties in that zone. It also features the Supreme power dual taper for a stiffer bottom portion of the shaft which in conjunction with the Pure Shot Blade profile, an expanded throat design as you transition from shaft to blade, provides torsional stiffness in such a way that reduces the likelihood of twisting and torquing of the blade. The 180 was engineered to boost energy output and provide a healthy combination of strength, power, precision and control. Just like the higher end Supreme 190 stick, the Supreme 180 uses a premium lightweight 12k woven carbon fiber in the shaft. 12k carbon is even better at managing stress than 3k woven carbon fiber, which has been used in high end composite sticks for years. The Supreme line of sticks have a square shaft shape with double-concave walls which is preferred among pros. Enhancing the nice secure grip provided from this shape is the MX3 Tac-Spiral ridges on the underside of the shaft. For the core of the Supreme 180 blade, Bauer uses a lightweight AERO FOAM 1, which provides great feel for the puck. The Blade is wrapped in Premium lightweight 3k Carbon Fiber, which adds stiffness to the blade, and features a matte finish. The Bauer Supreme 180 is a well-balanced stick with visible technologies that support a powerful and controlled shot all at a performance level price. This value proposition should get your consideration. Les mer